The Tiffen Series 9 Double Fog 3 Filter simulates the effects of natural fog or mist by creating a soft glow around highlights and lowering the overall contrast of the scene. When compared to the standard Fog filter, this filter places greater emphasis on lowering the contrast while maintaining sharpness and minimizing the effects of flare. The 3 density provides a noticeable amount of fog effect and requires no exposure compensation.

Tiffen filters are made using ColorCore technology, a process that involves laminating the filter substrate between 2 pieces of optical glass, grinding flat to a tolerance of 1/10,000th of an inch, and then mounting to precision metal rings. This filter is compatible with Series 9 filter holders.

Provides a Fog-Like Effect to Image    Dramatically Lowers Contrast    Maintains Sharpness and Minimizes Flare    ColorCore Technology

Provides a fog-like effect with dramatically lowered overall contrast.

Maintains greater sharpness and is less affected by highlight-flare than the standard Fog filter.

3 density gives a noticeable fog effect.

Does not require exposure compensation to make up for filter effect.

Related Questions and Answers

Q: 1. Is it much stronger than previous version ? My old 128GB is falling apart from wear and tear.

A: There aren't any construction issues know with this card.

Q: 2. How many photos can I take with this card (120GB)?

A: It depends on your camera and resolution setting. Here are some guidelines to help you to this figure out; Most raw formats are uncompressed. This means that every raw file (at the same settings) has roughly the same size, no matter what’s in the photo. They are usually around 30MP each on a 20MP camera. So, if a raw file takes 30 MB of space, it can fit in the memory cards as follows: 32 gb = 1,092 photographs 64 gb = 2,184 photographs 128 gb = 4,368 photographs 256 gb = 8,732 photographs Jpg's; 32 gb = 4,700 photographs 64 gb = 9400 photographs 128 gb = 18,800 photographs 256 gb = 37,600 photographs

Q: 3. What is the small Allen key for???

A: For attaching/detaching the shoe mount.

Q: 4. This tripod with a head attached GD3WH can be placed in a bag, what comes with the kit?

A: The Benro TMA27A Tripod includes a tripod bag, strap, allen key for leg joint tensioning, a flat wrench for the tripod head screw nut, and 3 spikes for the feet. The case can fit with typicall ballheads, however the handles protruding slightly from the Benro GD3WH Geared Head may prevent it from fitting in the case together. Hope this helps.

Q: 5. When used as a monopod, what is the total height? I can't find this info anywhere.

A: One of the legs screws off and is then attached to the center column. The total height is approximately 64

Q: 6. Do these work well in the Nikon z6ii? any issues with overheating ("hot card" message when recording 4k 60fps)?

A: Yes, the Sony 120GB G-series XQD memory card will work with the Nikon Z6ii well. We have heard of XQD cards overheating after continued used. We also would recommend checking out CFExpress Type B cards as their price point to speed ratio tends to be more favorable, and the increase in speed usually helps with reducing transfer times, which means less time generating heat: https://bhpho.to/3dQYrRU https://bhpho.to/3dQYu02

Q: 7. I want to attach the monopod leg to an Oben leveling head but the female receptor on the head is either 3/8" or 1/4" - much too small to accept the large male screw on the monopod leg. What's the fix?

A: The Oben LH-2510 Leveling Base Head can fit the top of the monopod leg of the TMA28A, as the base plate of the tripod can be removed and added to it.

Q: 8. I've no experience with XQD cards, so ... Will an SD card fit into the QXD slot?

A: XQD cards only work with cameras with an XQD slot.

Q: 9. What is the max height without the center column extended?

A: Maximum Height w/o Column Extended53.1 (135 cm)

Q: 10. Does this tripod legs comes with padded bag which has room for head?

A: No, it does not. According to Benro, cases included with tripod legs by themselves are only designed to support the tripod legs, and will not fit a tripod with a head mounted. Benro tripods sold with heads as a kit would already allow for the additional length of the head. As the Benro TMA27A Series 2 Mach3 Aluminum Tripod, B&H # BETMA27A MFR # TMA27A, listed above does not include a head, and as such, the included case would not fit a head; it would fit the tripod only. Benro states the included case's dimensions are 4.33 x 4.33 x 30.30 in in size.