The Dalite 65 x 116" Cosmopolitan Electrol Motorized Projection Projection Screen is a rugged and reliable screen for office and educational use. This screen is a viable option when your venue does not permit or require a recessed screen.   The switch permits the screen to be stopped at pre-set limits but is adjustable.

Wall and Ceiling Mounted    Non-Tensioned    133" Diagonal    HDTV Format    16:9 Aspect Ratio    Front Projection    Matte White Finish    120V, 60Hz

Ideal for applications where a recessed installation is not desired or feasible

Patented in-the-roller motor mounting system for quiet operation

Standard white powder-coated finish

Matte White fabric up to 10' high will be seamless; Glass Beaded fabric up to 8' will be seamless; Video Spectra 1.5 and High Contrast Matte White fabric available in sizes up to 8' high; High Power fabric is available in sizes up to 9 x 12' and will be seamless in sizes up to 6' high

Optional floating mounting bracket allows screen to be mounted onto a wall or ceiling studs and aligned left or right after installation by releasing two sets of screws

UL listed

Related Questions and Answers

Q: 1. can I ust this adopter with sony a7m3 and sony gm 24mm 1.4??

A: For a full frame sensor, SLRMagic suggests the best performance will be with lenses in the 40-85mm range. With a 24mm, you would see the inside of the adapter, creating a very strong vignette.

Q: 2. Will this work with a FUJIFILM XF 16-55mm f/2.8 R LM WR Lens?

A: SLRMagic states the sensor size determines the compatible focal length. For a Fujifilm camera with an APS-C sensor, 35-85mm is the most appropriate focal length range.

Q: 3. What's the minimum focal length for this adapter? I'm choosing between a Veydra 25mm or 19mm for MFT as the taking lens for this (with a step-up ring).

A: A 19mm lens will be too wide. The 25mm would be a better option.

Q: 4. Will it work in the sigma 24-70 2.8 L mount?

A: Unfortunately the Anamorphic Adapter has a 65mm front diameter and the Sigma 24-70mm f/2.8 L mount lens' filter size is 82mm.

Q: 5. work with Meike 35mm T2.1 FF-Prime Cine Lens?

A: The SLR Magic Anamorphot-65 1.33x Anamorphic Adapter is compatible with the Meike 35mm T2.1 FF-Prime Cine Lens.

Q: 6. If I used this adapter on the newer SLR Magic Microprimes with 82mm front threads, would I only need to focus on the adapter if the taken lens is set to infinity focus or do I need to get one of those Rangefinder attachments?

A: Sorry, no. You will need to focus twice. Unfortunately, there is no Rangefinder available for this at this time. Panavision got an Academy Award when they figured out how to do this back in the '50s. (Hint, they ran a shaft and gear from the lens focus ring to the anamorphic focus ring.) But here and now, you will need to focus twice with the SLR Magic Anamorphot-65 1.33x Anamorphic Adapter.

Q: 7. What's the different between SLR Magic Anamorphot-40 1.33x Anamorphic Adapter (Compact) and SLR Magic Anamorphot-65 1.33x Anamorphic Adapter ?

A: The difference is in the size of the front element of the lenses it will be compatible with. The Anamorphot-65 works with lenses that have a front element size of up to 65mm in diameter, while the 40 works with smaller lenses with a front element size of up to 40mm in diameter.

Q: 8. 0This anamorphic SLR adapter could somehow fit the Voigtlander MFT 10.5mm, 17.5mm, 25mm and 42.50mm lenses? The front threads of Voigtlander lenses are 72, 58 and 52 respectively, I thought of using some adapter. What do you say? thank you!

A: We are still waiting for full details on this product. What we know at this time is that it works with lenses with a front element size of up to 65mm and has a rear thread size of 82mm. You will want to measure the lenses you have to make sure they are not wider than 65mm. You do need to take in to account focal lenght as well and in the past products like this would not work with wider lenses like a 10.5mm or 17.5mm and 25mm is right on the edge. The 42.5mm from Voigtlander has a good chance of working though, you would need a 58 to 82mm step up ring. Please keep in mind that we will need to wait for more details and even the products release before we can say for certain what lenses it will work with.https://bhpho.to/2Lhhgk6

Q: 9. does this adapter works with Sigma Art 35 mm 1.4 (67 mm ring) and Sigma Art 24mm 1.4 (77 mm ring) on S35 sensor?

A: It will not work with either lens because the filter thread size for the Sigma Art 35mm and 24mm are larger than the accepted 65mm.

Q: 10. Any recommended accessory for rigging this lens to 15mm rails?

A: The SmallRig Universal Lens Support with 15mm LWS Rod Clamp is a great option, BH #SM1784. https://bhpho.to/2P5fOEm