The Countryman E6s Omnidirectional Microphone is a miniature earset microphone for virtually invisible operation. The compact size and placement just in front of the ear make this microphone particularly well-suited for intimate theater and broadcast applications, or any use where low mic visibility is a key factor.

The omnidirectional pickup pattern provides a generous and forgiving pickup area around the perimeter of the capsule, while the stainless steel construction stands up to daily use, makeup, and sweat. The mic also comes with 3 different interchangeable caps that let you choose between a flat, bright, or very bright frequency response.

This version of the E6s is light beige and comes with a 2mm diameter Duramax cable. It terminates to a 6-pin Lemo connector for use with Audio Limited wireless transmitters.

Omnidirectional Pickup Pattern    Discreet Design    Stainless Steel Construction    2mm Diameter Duramax Cable    6-pin Lemo Connector    Interchangeable Frequency Response Caps    Optimized for Powerful Vocals

The miniature design is ideal for use in applications where visibility is a key factor, such as intimate theater settings and broadcasting

The stainless steel construction allows the mic to stand up to daily use, makeup, and sweat. When used with the included caps, the mic is virtually waterproof

The included 2mm diameter Duramax cable detaches easily from the headset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy, as they are available with a wide selection of connectors to accommodate various wireless transmitters

The omnidirectional polar pattern is effective in minimizing handling noise from fabric and wind

The mic comes with 3 interchangeable caps that provide you with a flat, bright, or very bright frequency response

The mic has a low sensitivity that is ideal for powerful vocal applications

Related Questions and Answers

Q: 1. What is the small number I get after my reading in F mode: EG 125s (small 6)?

A: The 478 display can be set to readout in full stops with 1/10 (which is the number you are referring to), Third Stops (which is what most cameras use), and Half stops (which is what older, manual camera lenses use). The meter reads out in 0.10 (tenth) stops to enable seeing the exact amount of lighting available and adjusting the light to a very fine degree. The 1/10 stop increases towards the next highest aperture number. This is a common feature for most Sekonic meters.

Q: 2. Do these come with the bulbs/flash tubes?

A: Yes, every Interfit flash head includes a flash tube. The modeling lamp is LED, which is hard-wired into the head. No other bulbs are needed.

Q: 3. Does the Godox AD100Pro have the masking function like some of the other Godox strobes?

A: The AD100 Pro does not offer this option.

Q: 4. Does it come with a sync cord? How long is it? Can it be used with Hasselblad C lenses?

A: It comes with a synch cord. Looks to be about 10 ft. I do not shoot Hasselblad and know nothing of the C lenses.

Q: 5. Can you use standard umbrellas with these light units?

A: Yes you can

Q: 6. What is the flash duration time?

A: Flash duration of the Godox AD100pro Pocket Flash (White) BH #GOAD100PROW is not specified.

Q: 7. Do I need trigger?

A: Yes, a Godox X series trigger is needed for the Godox AD100 Pro, which is camera -dependent. Those can be found here: https://bhpho.to/3sS1MH9

Q: 8. Does the A10 come with the Clic dome included?

A: Yes, Profoto includes the Clic Dome as a standard accessory with the purchase of the Profoto A10 AirTTL-C Studio Light for Canon.

Q: 9. Is the charger dual voltage?

A: Yes the charger is dual voltage.

Q: 10. Can it be used as a continuous light for video?

A: More than likely not. The AD100pro's modeling lamp is relatively weak at 1.8W (as opposed to many other video lights, which can range from 100W to 1000W). In a pinch, depending on your camera's settings, it could work.