The tan E6 Directional Earset Mic, Highest Overload, with Detachable 1mm Cable and TA5F Connector for Lectrosonics Wireless Transmitters from Countryman is a vocal microphone with an adjustable boom that weighs less than one-tenth ounce. It can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 Earset virtually disappears against the skin, so performers forget they're wearing a mic. Three sensitivity options cover general speaking to extremely powerful vocals and four color options allow you to match the E6 to your skin tone for minimum visibility.

In addition, the E6 Earset features a pattern-changeable directional microphone for maximum isolation and gain before feedback, but is available as a water- and wind-resistant omnidirectional microphone too. This directional E6 Earset's cable terminates to a TA5F connector for direct connection to an Lectrosonics IM, LM, UM100, UM190, UM190b, UM195b, UM200, UM200b, UM200c, UM250b, UM250c, or UM400 wireless bodypack transmitter.

For Vocals and General Speaking    Detachable 1mm Cable    TA5F (L4), See Description    30 Hz to 15 kHz Frequency Response    Includes Cardioid & Hypercardioid Caps    Headroom for Strong Vocals    Windscreen    Cable Clips    Carrying Case

The Countryman E6 head-worn Earset is small and lightweight, and is hardly visible from a distance.

The E6 Earset's stainless steel boom is built tough and can be bent and re-bent many times to fit different performers. The E6 is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps.

The flexible boom is easily shaped right on the performer's face and is available in multiple skin tones. Their protective caps let you shape the frequency response for different situations or to match other microphones; caps for the directional earset adjust the pattern from cardioid to hypercardioid. Choose a sensitivity for speaking or singing with up to 145 dB SPL capability.

The E6 provides high-quality audio with low distortion and an SPL of up to 145 dB. It delivers rich, full band audio quality.

Easy adjustment keeps the mic in a position for rejecting unwanted sounds. Countryman's omnidirectional Earset offers a reduction of 12 dB compared to a lavalier mic, while the directional E6 Earset provides even more isolation. Excellent for houses of worship, theater, and outdoor events.

An E6 replacement cable installs in seconds. The snap-on cables are rugged and available for almost any wireless transmitter or for XLR inputs with phantom power.

For strong vocals

Related Questions and Answers

Q: 1. does it have dual sided printing? also, is there an ID tray attachment that comes with or can be purchased with this printer?

A: It does not duplex. There is no ID tray attachment available.

Q: 2. What is the maximum weight of paper this printer can use? I am looking to print my design portfolio as well as cards that use paper that is 90 to 110 lbs. Also curious how the paper is feed through the nozzles.

A: Ryan: It should handle at LEAST 90 lb paper, but not certain about the 110. The paper is fed under the print nozzles as they pass back and forth OVER the paper. The nozzles are very easy to clean with simple alcohol and a cotton swab. This prevents over use of ink and keeps things flowing instead of gumming up if not used over a period of time. Hope this helps.

Q: 3. It shows there are four inks cartridges in a set. Does the black pigment tank come into use only with photos?

A: There are five ink cartridges, the usual C,M,Y, and two Black cartridges. I too have not been able to find out under what conditions the various cartridge are used. Maybe someone else can extract an answer from Canon.

Q: 4. i have a panasonic varicam lt and want to use one of the 4 pin dc power out ports to power the motors. is it possible and if so i need a male 4pin dc power cable to male 7pin lemo correct? do you have anything?

A: the DC output on the varicam LT will not power this this motor, you will need to power it from the D-tap output of the battery plate

Q: 5. I'm hoping I can use one grip for focus and the other grip for zoom. Is this possible?

A: Yes. The following kit includes. 2x Nucleus-M FIZ Lens Control Motors

Q: 6. Does it have auto duplex?

A: Yes. Auto 2-Sided (Duplex) Printing is listed as a feature on the manufacturer's website. https://shop.usa.canon.com/shop/en/catalog/pixma-g5020-megatank-ciss-printer

Q: 7. How is the range holding up with walls and obsticles between the hand unit and motor and what are those ranges?

A: The Tilta Nucleus-M has a 1000' / 304m wireless line-of-sight range. It's hard to test and know exactly the range between different materials and interferences but the signal should be fine.

Q: 8. Can I turn the camera on/off with this remote?

A: No, you cannot turn the camera on/off with the Sony RMT-P1BT Wireless Remote Commander.

Q: 9. Will this work with the Bescor FP-312T light? The manual for the FP-312T indicates that it can work with a remote control, but doesn't indicate which remote. I've written to the mfr, but have not gotten an answer.

A: No. The following remote will drive bescor FP576/ FP900 units.

Q: 10. Would this motor and hand grip work on the red Komodo to pull focus? I am wanting to mount a RH grip on a rosette off of a Timmy rail so I can pull focus with both hands on the rig. More of a run n gun type setup. Is this doable? Thx

A: yes this can be mounted on a 15mm rail system on a shoulder mount to pull focus during hand held operation