The Countryman E6s Omnidirectional Microphone is a miniature earset microphone for virtually invisible operation. The compact size and placement just in front of the ear make this microphone particularly well-suited for intimate theater and broadcast applications, or any use where low mic visibility is a key factor.

The omnidirectional pickup pattern provides a generous and forgiving pickup area around the perimeter of the capsule, while the stainless steel construction stands up to daily use, makeup, and sweat. The mic also comes with 3 different interchangeable caps that let you choose between a flat, bright, or very bright frequency response.

This version of the E6s is light beige and comes with a 1mm diameter cable. It terminates to a Switchcraft TA4-F connector for use with specific* Electro-Voice wireless transmitters.

Omnidirectional Pickup Pattern    Discreet Design    Stainless Steel Construction    1mm Diameter Cable    Switchcraft TA4-F Connector    Interchangeable Frequency Response Caps    Optimized for General Speaking

The miniature design is ideal for use in applications where visibility is a key factor, such as intimate theater settings and broadcasting

The stainless steel construction allows the mic to stand up to daily use, makeup, and sweat. When used with the included caps, the mic is virtually waterproof

The included 1mm diameter cable detaches easily from the headset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy, as they are available with a wide selection of connectors to accommodate various wireless transmitters

The omnidirectional polar pattern is effective in minimizing handling noise from fabric and wind

The mic comes with 3 interchangeable caps that provide you with a flat, bright, or very bright frequency response

The mic has a high sensitivity that is ideal for general speaking applications

Related Questions and Answers

Q: 1. Will this work with and have the same full functionality with the X2 and XPro triggers? Including HSS, etc?

A: The Godox SK400II-V Studio Flash Monolight if fully compatible with Godox XProC TTL Wireless Flash Trigger, Godox X2 2.4 GHz TTL Wireless Flash Triggers.

Q: 2. Can the barndoors be easily reversed so that their dark side is facing inwards?

A: Unfortunately, the leaves on the barndoors cannot be reversed in order to have the black side facing the inner portion of the panel.

Q: 3. Is it compatible with the Profoto remote?

A: The Profoto A10 AirTTL-F Studio Light for FUJIFILM (&BH# PRA10AIRTTLF) will work with the Profoto Connect Wireless Transmitter for FUJIFILM (B&H# PRCF) as well as the Profoto Air Remote TTL-F for Fujifilm (B&H# PRARTTLF).

Q: 4. What is the replacement power cable for the Godox SK400II-V? I understand it's quite long.

A: Any C13 AC cable can be used to power the Godox SK400II-V Studio Flash Monolight. Some options for this cable can be found here: https://bhpho.to/3zX2t8W.

Q: 5. Will this Trigger work with Lumix S5 and S5II cameras?

A: The trigger in the Godox SK400II-V Studio Flash Monolight (2-Light Kit) is manual and should work fine in the Lumix S5 and S5II cameras. It only uses the center pin in the hotshoe of the camera.

Q: 6. Will the Profoto A10 or A1x flash for Nikon work in TTL mode with a Canon transmitter on a Canon camera? The lamp is to be standing separately.

A: Unfortunately, no, you would not be able to trigger the Profoto A10 AirTTL-N Studio Light for Nikon or the Profoto A1X AirTTL-N Studio Light for Nikon off-camera using the Profoto Air Remote TTL-C for Canon in TTL automatic exposure mode. TTL automatic exposure would only be compatible when using the Profoto Air Remote TTL-N for Nikon with the above Nikon flashes.

Q: 7. Is the 320Ws available in a universal voltage version (suitable for Australia)?

A: A 220V version is available through the Interfit UK office. I would suggest contacting them to inquire about shipping and availability.

Q: 8. Can this unit be triggered as an optical slave?

A: Yes, as per the User manual, Optical Slave Cell When using a multiple light setup with your Honey Badger and a sync cord or a third-party remote, turn on the CELL button to activate the optical slave function. This will allow the light to be triggered by the light of your other flashes. NOTE: This requires direct line of sight between lights.

Q: 9. I own a Sony HDR-CX560V High Definition Handycam Camcorder. Can I use this ligth on the shoe located on the top of the camcorder or I need another accesory? Please note that the shoe is a little deep on the surface of the camcorder.

A: I don't know your particular camera but I only think you cameras shoe can be used as a cold shoe because this light requires a lot of batteries and it definitely goes through them quickly. Otherwise it's a great light.

Q: 10. Is the LED modeling lamp on the MS300-V daylight or tungsten balanced?

A: Thank you for waiting. The MS300-V has a daylight balanced LED modeling lamp.