The Countryman E6s Omnidirectional Microphone is a miniature earset microphone for virtually invisible operation. The compact size and placement just in front of the ear make this microphone particularly well-suited for intimate theater and broadcast applications, or any use where low mic visibility is a key factor.

The omnidirectional pickup pattern provides a generous and forgiving pickup area around the perimeter of the capsule, while the stainless steel construction stands up to daily use, makeup, and sweat. The mic also comes with 3 different interchangeable caps that let you choose between a flat, bright, or very bright frequency response.

This version of the E6s is light beige and comes with a 2mm diameter Duramax cable. It terminates to a Switchcraft TA4-F connector for use with Shure wireless transmitters.

Omnidirectional Pickup Pattern    Discreet Design    Stainless Steel Construction    2mm Diameter Duramax Cable    Switchcraft TA4-F Connector    Interchangeable Frequency Response Caps    Optimized for Loud Speaking and Vocals

The miniature design is ideal for use in applications where visibility is a key factor, such as intimate theater settings and broadcasting

The stainless steel construction allows the mic to stand up to daily use, makeup, and sweat. When used with the included caps, the mic is virtually waterproof

The included 2mm diameter Duramax cable detaches easily from the headset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy, as they are available with a wide selection of connectors to accommodate various wireless transmitters

The omnidirectional polar pattern is effective in minimizing handling noise from fabric and wind

The mic comes with 3 interchangeable caps that provide you with a flat, bright, or very bright frequency response

The mic has a medium sensitivity that is ideal for loud speaking and vocal applications

Related Questions and Answers

Q: 1. Will these work with the Canon 600Ex-Rt speedlites? also, are these wireless?

A: The Godox MS300-V Studio Flash Monolight works with optional X1, X2, XT-16, or FT-16 triggers to control the power ratio, modeling lamp, buzzer, and flash triggering. The best way to make the Canon EX-RT Speedlites wireless would be to use the Godox X2 2.4 GHz TTL Wireless Flash Trigger for Canon. This will sync your speedlites and allow them to be fired alongside or in sync with the Godox MS300-V Studio Flash Monolight.

Q: 2. Is the LED modeling lamp on the MS300-V daylight or tungsten balanced?

A: Thank you for waiting. The MS300-V has a daylight balanced LED modeling lamp.

Q: 3. Can you connect pocket wizards via cable to each light and work them separately on two different cameras?

A: Yes, you can connect a pocket wizard as a receiver to each Godox MS300-V Studio Flash. And set to different channels set them off from different cameras with a Pocket Wizard on each camera.

Q: 4. Is there a trigger for Sony A7r camera?

A: No, there is no trigger for the Interfit Honey Badger 320W to work it in TTL on a Sony Camera. The kit comes with a manual transmitter that will work. But best is to also get this adapter, https://bhpho.to/2AOISc7 .

Q: 5. I own a Sony HDR-CX560V High Definition Handycam Camcorder. Can I use this ligth on the shoe located on the top of the camcorder or I need another accesory? Please note that the shoe is a little deep on the surface of the camcorder.

A: I don't know your particular camera but I only think you cameras shoe can be used as a cold shoe because this light requires a lot of batteries and it definitely goes through them quickly. Otherwise it's a great light.

Q: 6. I cannot figure out how to connect the MS300 to the light stand. The light connection is round. Stand is screw-on adapter.

A: The post on the stand goes into the female receiver on the light. With this light you do not use the screw on the top of the stand. The light just goes on the post over the screw and down onto the larger post.

Q: 7. does it have cooling fan?

A: No. the Godox MS300-V Monolight with LED Modeling Lamp offer a heatsink.

Q: 8. Ok, I'm sorry asked my question in a funny way. Let's try again: Is it safe to plug this ms300-v on a 15amps house outlet? Or does it need to be plugged on a 20amps one?

A: You can plug the light into a 110v 15amp which is the average household plug in the US.

Q: 9. Can I purchase two of these, and use all 4 lights with a single trigger/camera?

A: Yes, 2 Godox MS300-V Studio Flash Monolight kits (4 lights) can be fired with one camera and one trigger/camera.

Q: 10. Does the 110/60HZ(USA) AC Adapter come with the unit ?

A: No, and it was a surprise for me cause it has no batteries either.