The Countryman E6s Omnidirectional Microphone is a miniature earset microphone for virtually invisible operation. The compact size and placement just in front of the ear make this microphone particularly well-suited for intimate theater and broadcast applications, or any use where low mic visibility is a key factor.

The omnidirectional pickup pattern provides a generous and forgiving pickup area around the perimeter of the capsule, while the stainless steel construction stands up to daily use, makeup, and sweat. The mic also comes with 3 different interchangeable caps that let you choose between a flat, bright, or very bright frequency response.

This version of the E6s is light beige and comes with a 1mm diameter cable. It terminates to a Switchcraft TA4-F connector for use with specific* Electro-Voice wireless transmitters.

Omnidirectional Pickup Pattern    Discreet Design    Stainless Steel Construction    1mm Diameter Cable    Switchcraft TA4-F Connector    Interchangeable Frequency Response Caps    Optimized for Loud Speaking and Vocals

The miniature design is ideal for use in applications where visibility is a key factor, such as intimate theater settings and broadcasting

The stainless steel construction allows the mic to stand up to daily use, makeup, and sweat. When used with the included caps, the mic is virtually waterproof

The included 1mm diameter cable detaches easily from the headset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy, as they are available with a wide selection of connectors to accommodate various wireless transmitters

The omnidirectional polar pattern is effective in minimizing handling noise from fabric and wind

The mic comes with 3 interchangeable caps that provide you with a flat, bright, or very bright frequency response

The mic has a medium sensitivity that is ideal for loud speaking and vocal applications

Related Questions and Answers

Q: 1. Is this light set a Browne mount

A: I'm not familiar with Browne mount, but if you mean Bowen mount then -yes, the light and the soft-boxes in this kit are Bowens S Accessory Mount.

Q: 2. Will the Godoy X proC work with these lights

A: Yes, the Godox XProC TTL Wireless Flash Trigger for Canon Cameras will work with the Godox MS300-V Studio Flash Monolight (2-Light Kit).

Q: 3. I own a Sony HDR-CX560V High Definition Handycam Camcorder. Can I use this ligth on the shoe located on the top of the camcorder or I need another accesory? Please note that the shoe is a little deep on the surface of the camcorder.

A: I don't know your particular camera but I only think you cameras shoe can be used as a cold shoe because this light requires a lot of batteries and it definitely goes through them quickly. Otherwise it's a great light.

Q: 4. How to attach this to a light stand?

A: You can use an umbrella adapter like # IMBSM to attach to a light stand ( also ,unscrew the shoe )

Q: 5. Which SPECIFIC batteries do you need to power this?

A: You need only to use batteries that are Sony NP-F9XX configuration. Therefore you can use any Sony or 3rd party like Watson just as long as they are of the Sony NP-F9XX type. Here are two examples. I suggest the largest size to maximize the light's run time. Sony NP-F970 L-Series Info-Lithium Battery Pack (6300mAh) B&H # SONPF970. Watson NP-F975 Lithium-Ion Battery Pack (7.4V, 7800mAh) B&H # WANPF975. I recommend the high quality Sony if you can budget it. If not, the Watson will serve you well.

Q: 6. Will this work with the xproI-II/x2t triggers?

A: Yes the internal radio on the Godox ms300 will work with the Xpro and Xpro II and x2t triggers from Godox. You will need to sync at the camera's shutter speed depending on which you are using. Because the ms300 is a manual flash it will not give you ttl or HSS functionality.

Q: 7. are the bulbs replaceable

A: They are not replaceable or repairable.

Q: 8. Can the Godox MS300-V be triggered with non-godox wireless flash trigger? For example, can it be triggered with Yongnuo YN560-TX?

A: The Yongnuo YN560-TX Manual Flash Controller for Canon cannot directly control the Godox MS300-V Studio Flash Monolight as the Yongnuo transmitter is not compatible with Godox's 2.4 GHz X-wireless system. That being said, if you purchase the Yongnuo RF-603C II Wireless Flash Trigger Kit for Canon 3-Pin Connection, B&H # YORF603IIC3, or the Yongnuo YN-622C II E-TTL Wireless Flash Transceiver for Canon (2-Pack), B&H # YOYN622CII , and connect them to the sync terminal on the Godox MS300-V using the Impact Sync Cord Male Mini (3.5mm) to Male PC (1'), BH #IMMMPCM1. This will allow the Yongnuo YN560-TX Manual Flash Controller for Canon to wirelessly trigger the Godox MS300-V monolight..

Q: 9. Is there an adapter that would allow this to be attached to a standard tripod? I can't quite tell how it's possible to attach something for mounting....

A: This has a 1/4 20 receiver that can be used with a tripod.

Q: 10. Will this fire off another strobe flash, rather than using a dedicated trigger?

A: The Godox MS300-V Studio Flash Monolight can set off other flashes if the other flash has an optical slave.