The tan E6 Directional Earset Mic, Highest Gain, with Detachable 1mm Cable and 3-Pin XLRM Connector for Lectrosonics Wireless Transmitters from Countryman is a vocal microphone with an adjustable boom that weighs less than one-tenth ounce. It can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 Earset virtually disappears against the skin, so performers forget they're wearing a mic. Three sensitivity options cover general speaking to extremely powerful vocals and four color options allow you to match the E6 to your skin tone for minimum visibility.

In addition, the E6 Earset features a pattern-changeable directional microphone for maximum isolation and gain before feedback, but is available as a water- and wind-resistant omnidirectional microphone too. This directional E6 Earset's cable terminates to a 3-pin XLRM connector for direct connection to an Lectrosonics HM, UH200d, UH400, or UH400a wireless bodypack transmitter.

For Vocals and General Speaking    Detachable 1mm Cable    3-Pin XLRM (LE), See Description    30 Hz to 15 kHz Frequency Response    Includes Cardioid & Hypercardioid Caps    Headroom for Strong Vocals    Windscreen    Cable Clips    Carrying Case

The Countryman E6 head-worn Earset is small and lightweight, and is hardly visible from a distance.

The E6 Earset's stainless steel boom is built tough and can be bent and re-bent many times to fit different performers. The E6 is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps.

The flexible boom is easily shaped right on the performer's face and is available in multiple skin tones. Their protective caps let you shape the frequency response for different situations or to match other microphones; caps for the directional earset adjust the pattern from cardioid to hypercardioid. Choose a sensitivity for speaking or singing with up to 145 dB SPL capability.

The E6 provides high-quality audio with low distortion and an SPL of up to 145 dB. It delivers rich, full band audio quality.

Easy adjustment keeps the mic in a position for rejecting unwanted sounds. Countryman's omnidirectional Earset offers a reduction of 12 dB compared to a lavalier mic, while the directional E6 Earset provides even more isolation. Excellent for houses of worship, theater, and outdoor events.

An E6 replacement cable installs in seconds. The snap-on cables are rugged and available for almost any wireless transmitter or for XLR inputs with phantom power.

For general speaking.

Related Questions and Answers

Q: 1. Is there a way to set the range on the FIZ? The user guide only shows how to on the handle.

A: No, their is no way to do such Tilta Nucleus-M Wireless Lens Control System Partial Kit I.

Q: 2. Does this remote come with carrying case like the RC-6 does?

A: No, a carrying case is not included with the purchase of the Canon BR-E1 Wireless Remote Control.

Q: 3. How would one attach this to the MōVI M5, and replace the stock handle?

A: You would need to use a 25mm rod clamps that have a 3/8"-16 end.

Q: 4. can this control iris zoom and focus at the same time? (Complete package edition)

A: Yes, the Tilta Nucleus-M Wireless Lens Control System includes two motors that can be controlled independently.

Q: 5. Can you mount the right handgrip on the Red Komodo Outrigger handle?

A: You could probably mount the Tilta Nucleus-M Wireless Lens Control System Partial Kit V's right handgrip to the RED DIGITAL CINEMA KOMODO Outrigger Handle if you get creative enough, but we would not recommend it, as it would likely be awkward to handle.

Q: 6. Batteries

A: The recommended battery for the Tilta Nucleus-M Wireless Lens Control System Partial Kit I hand unit would be the Zhiyun GMB-B118 18650 Lithium-Ion Battery (3-Pack), B&H # ZHGMBB118.

Q: 7. Can anyone explain the difference in the quality of the print for photographs between this printer, the iX6820 and the iP8720? I know the latter has the grey cartridge. So... does that grey matter for color prints? Also, what is the value in the 2 black cartridge (1 being pigment, 1 dye)?

A: The pigment black ink is used when you are printing on plain paper, for prints like documents, etc... The grey would help with black and white photos. So it would give yo a much better quality black and white print.

Q: 8. I previously had the 3200 Megatank, and the printer died before the first set of ink was gone. Apparently the ink overflow pad (?) was full and this was not fixable. I found that I needed to clean the print heads quite often, resulting in overflow. Is this printer the same in that respect? I do not want another disposable printer. Thank you.

A: Apparently all inkjet printers work the same, therefore they have to be constantly used otherwise the printhead will clog. This may also depend on the environment the printer is located i.e. humidity, dusty, extreme dry area, etc... In all these cases in order to unclog the printhead, cleaning cycles are required which uses ink & fills up the 'waste pads'. My advice is to use the printer minimum once a week (a nozzle check is OK) & leave it powered on all the time & in a regular temperature controlled room & you'll get the max of the printer.

Q: 9. Is this printer compatible with Moab photo paper? Moab does not have a downloadable ICC Profile for the iX Canon printers. How is the print quality with Moab papers using the iX6820?

A: The Canon PIXMA iX6820 Wireless Inkjet Printer (B&H# CAIX6820) is capable of printing on many different types of paper even if there is not an ICC profile for the specific type one may prefer to use. Typically, in such a situation one would use as similar of a profile as possible. For example, one would choose a profile for a similar glossy paper for printing on glossy third party paper, a profile for luster paper when printing on third party luster paper, and so on. If one finds the resulting colors too dense or light then one would adjust the photos prior to printing them so that the end result produces one’s preferred look.

Q: 10. Could I attach this handgrip to a regular tripod arm?

A: Yes, you could attach the handgrip in the Tilta Nucleus-M Wireless Lens Control System Partial Kit II (Right Handgrip) to a regular tripod arm. You will also need a clamp with an ARRI-standard rosette adapter.