You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Countryman E6 Directional Earset Mic, Medium Gain, With Detachable 2mm Cable And 3-pin Xlrm Connector For Lectrosonics Wireless Transmitters (cocoa)

Countryman E6 Directional Earset Mic, Medium Gain, With Detachable 2mm Cable And 3-pin Xlrm Connector For Lectrosonics Wireless Transmitters (cocoa)
  • Product Code: ga249091
  • Availability: In Stock

$1,931.85 $2,936.41

The cocoa E6 Directional Earset Mic, Medium Gain, with Detachable 2mm Cable and 3-Pin XLRM Connector for Lectrosonics Wireless Transmitters from Countryman is a vocal microphone with an adjustable boom that weighs less than one-tenth ounce. It can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 Earset virtually disappears against the skin, so performers forget they're wearing a mic. Three sensitivity options cover general speaking to extremely powerful vocals and four color options allow you to match the E6 to your skin tone for minimum visibility.

In addition, the E6 Earset features a pattern-changeable directional microphone for maximum isolation and gain before feedback, but is available as a water- and wind-resistant omnidirectional microphone too. This directional E6 Earset's cable terminates to a 3-pin XLRM connector for direct connection to an Lectrosonics HM, UH200d, UH400, or UH400a wireless bodypack transmitter.

For Vocals and General Speaking    Detachable 2mm Cable    3-Pin XLRM (LE), See Description    30 Hz to 15 kHz Frequency Response    Includes Cardioid & Hypercardioid Caps    Headroom for Strong Vocals    Windscreen    Cable Clips    Carrying Case

Key Specs
Compatible TransmittersLectrosonics: HM, UH200d, UH400, UH400a
Polar PatternCardioid / Hypercardioid
Frequency Response30 Hz to 15 kHz
Maximum SPL135 dB
SensitivityW6/6/Mid Gain for Speaking and Vocals (H6, E6, EM6, EM2)
Analog Output1x XLR 3-Pin Male
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Microphone
Compatible TransmittersLectrosonics: HM, UH200d, UH400, UH400a
Polar PatternCardioid / Hypercardioid
Included Tone/Pattern CapsHypercardioid, Cardioid
Performance
Frequency Response30 Hz to 15 kHz
Maximum SPL135 dB
Sensitivity1.9 mV/Pa
SensitivityW6/6/Mid Gain for Speaking and Vocals (H6, E6, EM6, EM2)
Equivalent Noise Level29 dB (A-Weighted)
Connectivity
Analog Output1x XLR 3-Pin Male
Cable Length5' / 152.4 cm
Cable Diameter0.08" / 2 mm
Power
Power SourcesPlug-In Power
Operating Voltage1 to 2 V
Physical
ColorCocoa
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Weight0.07 oz / 2 g
Packaging Info
Package Weight0.5 lb
Box Dimensions (LxWxH)10 x 10 x 2"

The Countryman E6 head-worn Earset is small and lightweight, and is hardly visible from a distance.

The E6 Earset's stainless steel boom is built tough and can be bent and re-bent many times to fit different performers. The E6 is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps.

The flexible boom is easily shaped right on the performer's face and is available in multiple skin tones. Their protective caps let you shape the frequency response for different situations or to match other microphones; caps for the directional earset adjust the pattern from cardioid to hypercardioid. Choose a sensitivity for speaking or singing with up to 145 dB SPL capability.

The E6 provides high-quality audio with low distortion and an SPL of up to 145 dB. It delivers rich, full band audio quality.

Easy adjustment keeps the mic in a position for rejecting unwanted sounds. Countryman's omnidirectional Earset offers a reduction of 12 dB compared to a lavalier mic, while the directional E6 Earset provides even more isolation. Excellent for houses of worship, theater, and outdoor events.

An E6 replacement cable installs in seconds. The snap-on cables are rugged and available for almost any wireless transmitter or for XLR inputs with phantom power.

For speaking and vocals.

Related Questions and Answers

Q: 1. Does the zoom functions work with Canon G5X II?

A: Yes the zoom functions would work on the Canon G5X Mark II.

Q: 2. How would one attach this to the MōVI M5, and replace the stock handle?

A: You would need to use a 25mm rod clamps that have a 3/8"-16 end.

Q: 3. Batteries

A: The recommended battery for the Tilta Nucleus-M Wireless Lens Control System Partial Kit I hand unit would be the Zhiyun GMB-B118 18650 Lithium-Ion Battery (3-Pack), B&H # ZHGMBB118.

Q: 4. I cannot find pairing standby mode on my canon sx70 hs. What can I do?

A: First step is to set up the camera for remote shooting. Then set the camera up for remote shooting. More details can be found on page 224 of the manual linked here. https://bhpho.to/3ASXHW9

Q: 5. Does this remote come with carrying case like the RC-6 does?

A: No, a carrying case is not included with the purchase of the Canon BR-E1 Wireless Remote Control.

Q: 6. #1 seller for an item that is coming soon ?

A: In this category it is a number 1 seller due to preorder sales.

Q: 7. Can anyone explain the difference in the quality of the print for photographs between this printer, the iX6820 and the iP8720? I know the latter has the grey cartridge. So... does that grey matter for color prints? Also, what is the value in the 2 black cartridge (1 being pigment, 1 dye)?

A: The pigment black ink is used when you are printing on plain paper, for prints like documents, etc... The grey would help with black and white photos. So it would give yo a much better quality black and white print.

Q: 8. Can you mount the right handgrip on the Red Komodo Outrigger handle?

A: You could probably mount the Tilta Nucleus-M Wireless Lens Control System Partial Kit V's right handgrip to the RED DIGITAL CINEMA KOMODO Outrigger Handle if you get creative enough, but we would not recommend it, as it would likely be awkward to handle.

Q: 9. Will this work to start and stop video recording on a Canon R3 ?

A: Yes the Canon BR-E1 Wireless Remote Control is compatible with the Canon R3.

Q: 10. Will this remote work with the A77ii?

A: It will not work. This one will : https://bhpho.to/2Eoa14t

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Qsc Kw122 Padded Speaker Cover

$299.97 $470.95

On-stage Gpk1000 Acoustic Guitar Bundle

$179.85 $255.39

K&m 17541 Acoustic Guitar Stand (black)

$179.97 $223.16

Products You May Like

Kupo Backlite Base Stand

$86.85 $109.43

Vijim Horizontal Extension Arm

$59.85 $77.21

Apple Homepod Mini (blue)

$284.97 $390.41

Lenovo 15.6" Ideapad Slim 3i Laptop

$1,347.00 $2,007.03

Pelican 9460 Remote Area Lighting System

$6,735.39 $10,170.44