The RDL Active D-Series Loudspeaker features a stainless steel grill and is designed to deliver rich, detailed sound while in Decora-compatible wall or chassis mounts. The input accepts either a -10 dBV unbalanced or a +4 dBu balanced signal on the rear-panel detachable terminal block.

Amplification is provided by the built-in high-efficiency Class D power stage amplifier. The amplifier features audio filtering so the speaker will produce crisp quality audio. The high-efficiency Class D output stage amplifier produces negligible heat for all levels of voice or music modulation. The amplified output level is controlled by a front panel volume control. The loudspeaker includes an analog compressor/limiter that makes higher average sound output levels possible without clipping.

The built-in driver is constructed of materials found in premium larger speakers. The unique steel enclosure provides full baffling in a tightly sealed rigid structure. The benefit of this enclosure is that it's designed to provide sonic presence within an extended frequency range expected from larger speakers. Internal filtering rolls off out-of-band frequencies to reduce distortion and increase peak power capability. Dispersion covers a spherical area of nearly 180 degrees with the speaker mounted in a wall.

Designed to provide quality audio for an ultra-compact size

2 watt RMS audio amplifier

Compressor/limiter prevents clipping

Balanced +4 dBu input on the rear panel

Unbalanced -10 dBV input on the rear panel

Front panel gain adjustment

Acoustically optimized Decora enclosure

Fidelity comparable to larger drivers

Hemispherical dispersion mounted in wall or flat surface

Related Questions and Answers

Q: 1. Can we use this with a MWIR camera? This would require the use of an alternative window such as saphire. Can the window be changed out?

A: The short answer is yes . Dotworkz offers some options on the front window on their web site. However, these are limited by the window shape. So, if your supplier of optics will not make a custom shape to fit the window frame you will need to fabricate a custom frame to fit your optics.

Q: 2. what is the maximum width of the room needed to set this up with 53" paper with turtle stand extended?

A: For the Savage Stainless Steel C-Stand Kit with 53" x 18' White Seamless Paper (9.5'), the maximum width needed to hold a 53" roll of seamless paper with the turtle stand extended will be 66".

Q: 3. Are these compatible with the vanguard veo 3

A: No, the Clawz Universal Stainless Steel Load-Spreading Feet for Tripods are not compatible with the Vanguard VEO 3.

Q: 4. Can you use 107' x 36'' paper?

A: The Savage Stainless Steel C-Stand Kit with 53" x 18' White Seamless Paper (9.5') is meant for rolls of 53" and smaller to achieve perfect fit and balance of the stand.

Q: 5. What is the internal camera volume? Trying to find a housing that would fit a VEO 410 high speed camera, which is 5x5x5 inches.

A: The Dotworkz S-Type COOLDOME 12 VDC Active Cooling Camera Enclosure with Stainless Steel Arm (B&H # DOSTCDSS) will not accommodate your VEO 410 high-speed camera. The internal camera’s installation area dimensions are no larger than 3.75 x 5.0 x 13" (H x W x L).

Q: 6. What is the RMS?

A: The Alto TS408 TrueSonic 4 Series 2000W 8- 2-Way Active Loudspeaker with Bluetooth is 1000W RMS.

Q: 7. Is 9.5' the minimum height or the maximum height? What is the minimum height?

A: Yes. Max height for the following C-stand is 9.5 ft.

Q: 8. Can paper roll in front of stand onto floor without c stand leg interference?

A: When using the Savage Stainless Steel C-Stand Kit with 53" x 18' White Seamless Paper (9.5') the paper roll can be place between legs by rotating the riser to a preferred position, bypassing the legs.

Q: 9. Will this hold a 5x7 collapsible Lastolite background?

A: 100% with no problem.

Q: 10. In the description is says terminal block connectors but it does not show terminal connectors in the pictures. Can someone confirm the back connector? Would prefer terminal block and not soldered.

A: Thank you for bring this oversight to our attention. The SKU, model number, and description are all correct. The image will be updated soon. Thanks again!