The 5,700K ReNEW Daylight LED Retrofit Assembly with Stage Pin Power Cord from PRG is an LED light engine designed to work in conjunction with the lens tube and shutter assemblies of the ETC Source ellipsoidal.

Exchanging the tungsten light source of the Source Four with the daylight LED source of the ReNEW Assembly reduces energy consumption and HVAC costs while producing lumen output that exceeds a 575W HPL lamp. The ReNEW light engine draws 190W at full output and just 3.1W during standby.

The assembly is designed around a chip-on-board (COB) LED light source array paired with a specially designed reflector and lens that provides optimal illuminance distribution through the Source Four lens. The COB array is designed for easy future upgrading as improved LEDs become available.

The Source Four reflector and lamp assembly can be replaced in less than a minute with the ReNEW Assembly which is compatible with both ETC standard and Enhanced Definition Lens Tubes (EDLT) and all Source Four accessories. The fixture can be operated with 1, 2, or 3 channels of DMX control, or operated in user-selectable stand-alone mode for simple installations or where DMX is not available. A DMX signal can be connected and passed through the unit via optically isolated male and female flush-mount 5-Pin XLR connections.

The ReNEW Assembly offers 90-240 VAC 50/60 Hz operation via its Neutrik powerCON connection while up to four 4 units may be linked using the thru connector. An additional power connection is available for a 9 VDC battery to operate the control panel for quick setup or for shop preparation without need to connect primary full power to the unit.

Replacement Light Engine for ETC Source Four Ellipsoidals

Related Questions and Answers

Q: 1. Would this cable work for the Godox VL 300?

A: Yes, this will work with the Godox VL 300. But you might be needed a Female 4-pin XLR ot a Male 4-pin XLR cable. https://www.bhphotovideo.com/c/product/1091267-REG/genaray_mb_bcxlr_12v_battery_xlr_cable.html BH #GEMBBCXLR

Q: 2. Does this light happen to come with a soft case?

A: Unfortunately, this light does not include a case.

Q: 3. Are these hot lights, for use shooting video?

A: This unit is a cool led light and is good for video

Q: 4. What gauge is the wire in this cord?

A: The Comprehensive Standard PC Power Cord feature an 18 gauge conductor size.

Q: 5. Are these lights replacements for the LED lights that come with the Smith Victor 42-inch pro duty copy stand kit (CS42K)?

A: The Smith-Victor SlimPanel 400 Watt Daylight LED Light is not a replacement for the lights that came with the Smith Victor 42-inch pro duty copy stand kit (CS42K). The lights that came with the copy stand are still made but come as a kit, https://bhpho.to/4768pIu.

Q: 6. Do these lights come with a power cord?

A: Yes, the Smith-Victor SlimPanel 400 Watt Daylight LED Light would include the 100-240 VAC (50/60 Hz) AC power adapter to power the LED light fixture.

Q: 7. How long do the 2 batteries keep the light charged?

A: The two batteries will give you about a 1.5 hour runtime on full power.

Q: 8. can i store a big 15.6 laptop with its charger?

A: Yes, the HP Renew Business Series 17.3" Laptop Bag, BH #HE3E2U6UT, can fit up to a 17.3'' laptop with it's charger.

Q: 9. How do these compare to the use of a ring light for an iPhone video shoot?

A: Yes, the Smith-Victor SlimPanel 800W is three times brighter the any ring light on the market.

Q: 10. Would this cable work for the Godox VL 150?

A: Yes. The unit runs of a 4pin XLR system.