You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Countryman E6 Omni Earset Mic, Highest Gain, With Detachable 1mm Cable And Lemo 6-pin Connector For Audio Limited Wireless Transmitters (beige)

Countryman E6 Omni Earset Mic, Highest Gain, With Detachable 1mm Cable And Lemo 6-pin Connector For Audio Limited Wireless Transmitters (beige)
  • Product Code: ga250265
  • Availability: In Stock

$1,740.00 $2,140.20

The beige E6 Omnidirectional Earset Mic, Highest Gain, with Detachable 1mm Cable and LEMO 6-Pin Connector for Audio Limited Wireless Transmitters from Countryman is a vocal microphone with an adjustable boom that weighs less than one-tenth ounce. It is a water- and wind-resistant microphone that can be used on either ear for capturing audio in houses of worship, theater, or outdoor vocal and speech applications.

The low-profile, omnidirectional E6 Earset virtually disappears against the skin, so performers forget they're wearing a mic. Three sensitivity options cover general speaking to extremely powerful vocals and four color options allow you to match the E6 to your skin tone for minimum visibility.

In addition, the E6 Earset features three omni caps (very bright +8 dB, bright +4 dB, and flat +0 dB) that deliver response characteristics for most other applications such as recording flute and violin. The E6 Earset is available as a directional microphone too with cardioid and hypercardioid caps. This omnidirectional E6 Earset's cable terminates to a LEMO 6-pin connector for direct connection to an Audio Limited TX2000 or RMS-2000-mxl wireless bodypack transmitter.

For Vocals and General Speaking    Detachable 1mm Cable    LEMO 6-Pin (AL), See Description    20 Hz to 20 kHz Frequency Response    Headroom for Strong Vocals    Includes +8, +4, and +0 dB EQ Caps    Windscreen    Cable Clips    Carrying Case

Key Specs
Compatible TransmittersAudio Ltd.: RMS-2000-mxl, TX2000
Polar PatternOmnidirectional
Frequency Response20 Hz to 20 kHz
Maximum SPL120 dB
SensitivityW5/5/High Gain for General Speaking (H6, E6, EM6, EM2)
Analog Output1x LEMO 6-Pin
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Microphone
Compatible TransmittersAudio Ltd.: RMS-2000-mxl, TX2000
Polar PatternOmnidirectional
Included Tone/Pattern Caps+4 dB Bright, +0 dB Flat, +8 dB Very Bright
Performance
Frequency Response20 Hz to 20 kHz
Maximum SPL120 dB
Sensitivity7.0 mV/Pa
SensitivityW5/5/High Gain for General Speaking (H6, E6, EM6, EM2)
Equivalent Noise Level24 dB (A-Weighted)
Connectivity
Analog Output1x LEMO 6-Pin
Cable Length5' / 1.52 m
Cable Diameter0.039" / 1 mm
Power
Power SourcesPlug-In Power
Operating Voltage1 to 2 V
Physical
ColorBeige
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Weight0.07 oz / 2 g
Packaging Info
Package Weight0.5 lb
Box Dimensions (LxWxH)10 x 10 x 2"

The Countryman E6 head-worn Earset is small and lightweight, and is hardly visible from a distance.

The E6 Earset's stainless steel boom is built tough and can be bent and re-bent many times to fit different performers. The E6 is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps.

The flexible boom is easily shaped right on the performer's face and is available in multiple skin tones. Their protective caps let you shape the frequency response for different situations or to match other microphones; caps for the directional earset adjust the pattern from cardioid to hypercardioid. Choose a sensitivity for speaking or singing with up to 140 dB SPL capability.

The E6 provides high-quality audio with low distortion and an SPL of up to 140 dB. It delivers rich, full band audio quality.

Easy adjustment keeps the mic in a position for rejecting unwanted sounds. Countryman's omnidirectional Earset offers a reduction of 12 dB compared to a lavalier mic, while the directional E6 Earset provides even more isolation. Excellent for houses of worship, theater, and outdoor events.

An E6 replacement cable installs in seconds. The snap-on cables are rugged and available for almost any wireless transmitter or for XLR inputs with phantom power.

For general speaking.

Related Questions and Answers

Q: 1. Is there a way to set the range on the FIZ? The user guide only shows how to on the handle.

A: No, their is no way to do such Tilta Nucleus-M Wireless Lens Control System Partial Kit I.

Q: 2. Does using this as a remote follow-focus while recording video on the R6 affect the runtime with the existing overheating issues?

A: There is no information that using the Canon BR-E1 Wireless Remote Control with the R6 has any effect to over heating.

Q: 3. Works with R5c?

A: Yes Canon R5c is compatible with Canon BR-E1 Wireless Remote Control.

Q: 4. Does this model print directly on CDs and DVDs?

A: No. There is not a straight-thru paper path.

Q: 5. Are you able to scan to a usb thumb drive?

A: No, the Canon PIXMA G6020 Wireless MegaTank All-in-One Printer does not have the ability to scan directly to a USB flash drive.

Q: 6. is there a non-wireless shutter release for the EOS M50 II ?

A: No, the Canon m50ii can only use the Canon BR-E1 Wireless Remote Control. Or you can use a computer and tether the camera to that and use the Canon software or some others.

Q: 7. will the Canon BR-E1 work while the camera is tethered?

A: No, the Canon BR-E1 Wireless Remote Control cannot work while tethered.

Q: 8. does the button work like the the camera shutter button (press 1/2 way and all the way)?

A: Yes, half way for focus, full press to shoot.

Q: 9. Hi, I saw that people were experiencing problems with the two sided option being grayed out.Someone thought it was a driver problem, but could it be that this printer is not capable of printing two sided documents? Sorry to be dense, but could someone tell me for sure? Thank you!

A: The Canon PIXMA iX6820 Wireless Inkjet Printer BH #CAIX6820 does not support automatic double sided printing (duplex) so there wouldn't be an option for that. You would have to do it manually.

Q: 10. Would this motor and hand grip work on the red Komodo to pull focus? I am wanting to mount a RH grip on a rosette off of a Timmy rail so I can pull focus with both hands on the rig. More of a run n gun type setup. Is this doable? Thx

A: yes this can be mounted on a 15mm rail system on a shoulder mount to pull focus during hand held operation

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Mefoto Backpacker Travel Tripod (orange)

$389.85 $479.52

Products You May Like

Canon Pfi-206 Black Ink Cartridge (300 Ml)

$477.00 $758.43

Film Devices Rack-n-bag Harness

$225.00 $299.25

Pelican Padded Divider Set For 1560 Cases

$600.00 $792.00

Thule Enroute Backpack (black, 21l)

$269.85 $407.47

Jupio Tri-charge For Sony Np-fz100

$389.85 $471.72