The On-Line SRT 5000VA RM (208V) Smart-UPS from APC provides power to your important computer components in the event of an electrical outage. The power supply comes with 4250W / 5000VA output. Text and mimic diagrams display modes of operation, system parameters, and alarms with an LCD display. A Green operating mode bypasses unused electrical components in good power conditions to achieve high operating efficiency without sacrificing any protection. It has hot-swappable batteries that ensure clean, uninterrupted power to protected equipment while batteries are being replaced.

Please note that this item requires as 220-240V plug.

4250W / 5000VA Output Power Capacity    208V Nominal Output Voltage    Double Conversion Online Topology    Automatic and Manual Internal Bypass    10' Cord Length    LCD Graphics Display    Audible and Visible Alarms    1.5 Hours Recharge Time    Hot-Swappable Batteries    Green Mode

Text and mimic diagrams that display modes of operation, system parameters, and alarms

Connect the device to a network using a 10 or 100 BaseT connection

Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve high operating efficiency without sacrificing any protection

Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Protects the initial investment in the UPS when migrating from tower to rack-mount environment

Supplies utility power to the connected loads in the event of a UPS power overload or fault

Allows additional run time to be quickly added as per the requirements

Maximizes battery performance, life, and reliability through intelligent, precision charging

Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Automatically starts up the connected equipment upon the return of utility power

Prolongs battery life by regulating the charge voltage according to battery temperature

Provides remote power management of the UPS over the network

Enables centralized management via the APC InfraStruXure manager

Customize UPS capabilities with management cards

Quickly understand unit and power status with visual indicators

Provides management of the UPS via a serial port

Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS

Protects the initial investment in the UPS when migrating from tower to rack-mount environment

Install maintenance releases of firmware remotely using FTP

Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Periodic battery self-test ensures early detection of a battery that needs to be replaced

Provides early-warning fault analysis ensuring proactive component replacement

Warns when a battery is not available to provide backup power

Provides notification of changing utility power and UPS power conditions

Gives higher application availability by correcting poor frequency and voltage conditions without using the battery

Protects connected loads from surges, spikes, lightning, and other power disturbances

Minimizes installation costs by enabling the use of smaller generators and cabling

Ensures clean, uninterrupted power to protected equipment when generator power is used

Provides temporary battery power when the utility power is out

Easy recovery from overloads, so no need to replace a fuse

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment

Related Questions and Answers

Q: 1. Hi, the kit comes with: RJ45 cable USB Cable Power cord and what type is it? Rack mount brackets Support rails for rac

A: The APC Smart-UPS SRT 2200VA comes with a USB Type-A cable, Removable Support Feet, and the following warranties: Limited 2-Year Warranty (Battery) and Limited 3-Year Warranty (Excluding Battery).

Q: 2. How loud is this at idle? In my experience, some line-interactive UPS are noisiest when the AC input is ON, but quiet when running off of battery.

A: It is relatively quiet. Not whisper quiet. Similar to other units.

Q: 3. Does this display how much run time is left similar to the BR1500MS?

A: The LCD display is capable of showing multiple parameters, including time left.

Q: 4. Can IEC to regular 3-prong female be used to power non-IEC devices?

A: No, this unit outputs 230VAC and will damage / destroy most electronics that use 110/120VAC. It uses an IEC female plug to prevent accidental use with standard 110/120VAC plugs.

Q: 5. For 500w 1-PC what is hold (backup time this battery can give) **/hr ?

A: Thank you for your inquiry. A 500w PC connected to the UPS would provide 36.9 min of runtime.

Q: 6. Can u set it down flat on a desk?

A: Yes it is large but can lie flat.

Q: 7. Can I connect up to 15 desktop computers to this UPS?

A: No, the APC SMX3000LVNC Smart-UPS X 3000VA Rack/Tower with Network Card (100-127V) has only 10 outlets, 6 x NEMA 5-15R, 1 x NEMA L5-30R, and 3 x NEMA 5-20R.

Q: 8. Hi I am insterested to buying qty 2 or 3 APC Smart-UPS X 3000VA Rack/Tower with LCD and Network Card (200-240V) BH #AP3000RMHUNC • MFR #SMX3000RMHV2UNC UPS systems that you have in stock and I want to know which warranty are you offering for the battery and the system? Thank you! Patricio Dau, Lyncean Technologies

A: This product has a 2 year limited warranty. Please feel free to call or email us for assistance with purchasing this item.

Q: 9. Need to know if APC Smart-UPS SRT1500XLA is an 'online' UPS that will prevent connected device with 100W power draw to hard reboot if utility power fails for 5 minutes?

A: This system has 7.6 minutes of use at 1000W power draw as its listed uptime.

Q: 10. Do you sell the hardwired input box accessory for this UPS?

A: The APC Smart-UPS SRT1500XLA Battery Backup & Surge Protector BH #APSRT1500XLA does not have the option for hardwired input.