Avs Video Surveillance Cameras

Link Electronics 816-op/a Analog Video Matrix For Avs-816

Product Code: ga250516
Availability: In Stock

$2,320.50 $3,619.98

Qty

0 reviews Write a review

Description
Reviews (0)

The 816-OP/A Analog Video Matrix for AVS-816 from Link Electronics is an analog video matrix card designed for use in the AVS-816 Audio-Video routing switcher. The AVS has seven cards available to customize its configuration.

This unit is an analog video plug-in board. By using this card, the AVS-816 takes on the functionality of a video-only switcher.

Software supplied with the AVS-816 routing switcher allows you to control the functionality of this card from your computer. The unit can additionally be controlled with the AVS-816's remote control.

Parameters
Inputs	16x
Outputs	2x
Switch Type	Matrix
Configuration	Single-ended
Level	1vpp ± 3dB
Impedance	75Ω ± 1%
Frequency Response	± 0.5dB to 15 MHz
Differential Phase	<0.1°
Differential Gain	<0.1%
Signal-to-Noise Ratio	>70dB
THD & Noise	<0.004% @ 20KHz
Crosstalk	>60dB, Worst Case
Control	RS232, remote control
Power	Input: 120/240 VAC ± 10% 50/60 Hz Power: 8 VAR
Dimensions	1-3/8 x 6-1/4 x 7"
Weight	8.5 oz
Packaging Info
Package Weight	3 lb
Box Dimensions (LxWxH)	14 x 11 x 6"

This unit is an analog video matrix card designed for use in the AVS-816 Audio-Video routing switcher.

Software supplied with the AVS-816 routing switcher allows you to control the functionality of this card, or use the AVS-816's remote control.

Related Questions and Answers

Q: 1. Is the wide angle lens interchangable?

A: No. Only the microphones.

Q: 2. Will this plate fit the 502 manfrotto head?

A: Yes, all Manfrotto tripods from the older 710 HDV up to the 504, (maybe all), use the same size plate. Some are longer than others, but the height/width/design is the same.

Q: 3. Will this fit the Benro S8 Pro Video Head? Other customers buy the S8's plate for the Manfrotto 502 head, hoping it works the other way around too.

A: The Benro S8 uses the Benro QR13 Quick Release Plate. This plate is interchangeable with the Manfrotto 504PLONG, 501PL, 519 and the Benro QR6. So yes, the QR13 Quick Release Plate will fit on the Manfrotto 502 since that uses the 504PLONG Long Quick-Release Mounting Plate.

Q: 4. can i use the Rode smartLav+ Lavalier Condenser Microphone?

A: Yes you can use basic Lavalier Condesner microphones and to use the Rode SmartLAV+ you will need to use the Rode SC3 3.5mm TRRS to TRS Adaptor for smartLav.

Q: 5. Will this plate fit the OConnor Sideload Quick Release Top Platform C1248-1001?

A: It will not.

Q: 6. Can the camera run on AC power only for a really long continuous shot (3+hrs)?

A: If you power the camera via the USB port with a USB power supply or by being connected to a computer, you can record as long as there is room on the media card. A 32GB card will record over over 4 hours of HD.

Q: 7. Will this work for my MVM500a fluid head on my manfrotto monopod? I lost my plate for it

A: yes it will, b&h has them at a good price and they will fit on most manfrotto heads.

Q: 8. Is there a remote on/off for this camera? Can it be turned on and off from a distance?

A: no

Q: 9. What are the audio input impedances and levels? Are they hardware or software switched? Can you provide audio specs?

A: These audio specifications are not published. All camera controls are accessed from the camera's MENU. Here are the available details:Microphone Recording Angle: 120Channels: StereoAudio Format: AAC and WAVSampling Frequency:AAC: 48.0 kHzWAV: 96.0 kHzWAV: 48.0 kHzWAV: 44.1 kHzBit Rate: AAC: 320.0 kbpsAAC: 256.0 kbpsAAC: 192.0 kbpsAAC: 128.0 kbpsAAC: 64.0 kbpsWAV:24.0-bitWAV:16.0-bit Owner's Guide:a href= http://static.bhphotovideo.com/lit_files/106913.pdf target= _blank http://static.bhphotovideo.com/lit_files/106913.pdf/a

Q: 10. I need the Quick Release Plate for the older (M3) version of this tripod. Do you sell the plate separately and if so can I get the dimensions?

A: They do, and I bought one.

There are no reviews for this product.