The beige E6 Directional Earset Mic, Highest Gain, with Detachable 1mm Cable and 3.5mm Connector for Toa Wireless Transmitters from Countryman is a vocal microphone with an adjustable boom that weighs less than one-tenth ounce. It can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 Earset virtually disappears against the skin, so performers forget they're wearing a mic. Three sensitivity options cover general speaking to extremely powerful vocals and four color options allow you to match the E6 to your skin tone for minimum visibility.

In addition, the E6 Earset features a pattern-changeable directional microphone for maximum isolation and gain before feedback, but is available as a water- and wind-resistant omnidirectional microphone too. This directional E6 Earset's cable terminates to a 3.5mm connector for direct connection to a Toa WM-370, WM-4310,WM-5320, or WM-5325 wireless bodypack transmitter.

For Vocals and General Speaking    Detachable 1mm Cable    3.5mm (TO), See Description    30 Hz to 15 kHz Frequency Response    Includes Cardioid & Hypercardioid Caps    Headroom for Strong Vocals    Windscreen    Cable Clips    Carrying Case

The Countryman E6 head-worn Earset is small and lightweight, and is hardly visible from a distance.

The E6 Earset's stainless steel boom is built tough and can be bent and re-bent many times to fit different performers. The E6 is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps.

The flexible boom is easily shaped right on the performer's face and is available in multiple skin tones. Their protective caps let you shape the frequency response for different situations or to match other microphones; caps for the directional earset adjust the pattern from cardioid to hypercardioid. Choose a sensitivity for speaking or singing with up to 145 dB SPL capability.

The E6 provides high-quality audio with low distortion and an SPL of up to 145 dB. It delivers rich, full band audio quality.

Easy adjustment keeps the mic in a position for rejecting unwanted sounds. Countryman's omnidirectional Earset offers a reduction of 12 dB compared to a lavalier mic, while the directional E6 Earset provides even more isolation. Excellent for houses of worship, theater, and outdoor events.

An E6 replacement cable installs in seconds. The snap-on cables are rugged and available for almost any wireless transmitter or for XLR inputs with phantom power.

For general speaking.

Related Questions and Answers

Q: 1. is there a non-wireless shutter release for the EOS M50 II ?

A: No, the Canon m50ii can only use the Canon BR-E1 Wireless Remote Control. Or you can use a computer and tether the camera to that and use the Canon software or some others.

Q: 2. Does it print on photo paper up to 8.5x11"? It seems the description only describes photo printing up to 4x6".

A: Yes, the Canon PIXMA G5020 Wireless MegaTank Printer (B&H# CAPIXMAG5020) can print on photo paper that is 8.5 x 11" such as Canon PP-301 Photo Paper Plus Glossy II (8.5 x 11", 20 Sheets) (B&H# CAPPG2851120): https://bhpho.to/3BmZZf5

Q: 3. Does the remote work for bulb mode?

A: Yes, the Canon BR-E1 Wireless Remote Control works for bulb mode.

Q: 4. Will this shoot in bulb and burst mode on an R6? I've always used the wired remote on my previous Canons, and this is possible with the switch. However, now that I've switched to an R6 it uses a different (mini-plug) connector, so I need a new remote and would like to switch to wireless if bulb/burst is supported.

A: The Canon BR-E1 Wireless Remote Control can be used in Bulb mode when used with the Canon EOS R6. You first press the shutter release on the remote to start the exposure, and then press it again to stop exposure. If the camera is in burst mode you hold the shutter release down.

Q: 5. Can this printer print on 4mil 13x19 inkjet transparency film?

A: Yes! But this is only a dye based ink printer, so it's not water resistant.

Q: 6. Will this work to start and stop video recording on a Canon R3 ?

A: Yes the Canon BR-E1 Wireless Remote Control is compatible with the Canon R3.

Q: 7. Will this be compatible with the EOS 6D mark ii?

A: Yes, according to Canon's website.

Q: 8. Can BR-E1 and camera shutter both be used once paired with R6?

A: Yes, it is possible to use both the shutter button on the Canon EOS R6 Mirrorless Digital camera and the shutter button on the Canon BR-E1 Wireless Remote Control to trigger the shutter on the Canon EOS R6 if you go to the camera's menu and go to [Shooting Menu: Remote Control] and set to [Enable]. I would not try to press the shutter button on the remote and the camera simultaneously, but if you are near your camera, you may use the camera's shutter button, then when you are at a distance from the camera, you can use the wireless remote without changing the camera settings.

Q: 9. Is this compatible with the Canon M6 amd M5?

A: No, neither of those cameras have Bluetooth, which is how this remote operates.

Q: 10. How is the range holding up with walls and obsticles between the hand unit and motor and what are those ranges?

A: The Tilta Nucleus-M has a 1000' / 304m wireless line-of-sight range. It's hard to test and know exactly the range between different materials and interferences but the signal should be fine.