The On-Stage MSA-9508 is a side mini-boom measuring 7" in length. This side boom is designed for those hard to reach places, which makes it quite suitable for drum or instrument miking in confined spaces. It attaches to most round stands by means of its clutch; this clutch utilizes a nylon-tipped tightening screw that provides security without marring the accompanying shaft.

The MSA-9508 sports a patented Posi-Lok design for angle adjustment, one that provides two disks, each with 52 teeth to ensure the boom remains locked after it's set in place by the round, ergonomic knob. The Posi-Lok design rotates 300°. A standard 5/8"-27 thread at the end of the boom accepts most standard mic clips.

7" Boom Arm    5/8"-27 Threaded End for Standard Clips    Quick Angle Adjustments    Patented 52-Teeth Posi-Lok Design    Nylon-Tip Tightening Screw for Security    Clutch Grips to Round Shafts

Related Questions and Answers

Q: 1. Does this work to power fujifilm xh2s?

A: The SmallRig VB99 Mini V-Mount Battery can power a FUJIFILM X-H2S with a cable like this:Wooden Camera D-Tap to FUJIFILM NP-W235 Dummy Battery (12") BH #WOA00006 • MFR #A00006.

Q: 2. Is this compatible with Komodo X?

A: The SmallRig VB50 Mini V-Mount Battery has a formfactor that is too wide to be mounted onto the RED Komodo-X. You must use a "Micro," series battery on this and the V-Raptor.

Q: 3. Can this power a canon m50 mkii via dummy battery and with a monitor attached? Will it fry my camera?

A: Yes, the SmallRig VB50 Mini V-Mount Battery (50Wh) could power the Canon M50 with a Dummy battery like the following. You could also power other gear as well depending on the cables required for the Display model you are working with. BLUTEC D-Tap to Regulated LP-E17 Dummy Battery Cable (38") BH #BLBTLPE17 • MFR #BTLPE17 Kondor Blue Male D-Tap to 4-Port Female D-Tap Splitter Hub with Voltmeter (16") BH #KODTAPHUB • MFR #KB-DTAP-HUB

Q: 4. Any consequences for charging via USB with less than 65W? Example 40w or 20w? Does it affect durability?

A: The durability of the battery will not be effected at all when using a lower wattage charger. However, the SmallRig VB99 Mini V-Mount Battery (99Wh) will take longer to charge. 65w charger Idea: IDX System Technology UC-PD1 Pocket Travel Fast Charger & Power Supply BH #IDUCPD1 • MFR #UC-PD1

Q: 5. says 14.8v output here but once I got the unit it says only 5v on Dtap I can't get the ninja v to power through tap?

A: It could be the cable that you are working with that is regulating the power. We recommend using this cable with the Atomos battery Eliminator. https://bhpho.to/3X4eXD9

Q: 6. What is the DC Barrel Size?

A: The SmallRig VB50 Mini V-Mount Battery (50Wh) (B&H# SM3579) has two DC barrel ports on it. The 8V OUT port is 5.5mm in diameter with a 2.1mm diameter center pin. The 12V OUT port is also 5.5mm in diameter but has a 2.5mm diameter center pin.

Q: 7. What does it mean when OP flashes on the screen?

A: When the SmallRig VB50 Mini V-Mount Battery (50Wh) screen flashes "OP," it means that : The total discharging power exceeds the rated total power. This information is located in the operation manual on page 6.

Q: 8. Is it safe to plug the dummy battery for an A7 IV straight into the 8V output on the Smallrig battery?

A: No, I would not recommend using the 8V output on the SmallRig VB99 Mini V-Mount Battery (99Wh) to power your A7 IV as it uses 7.2VDC, and would likely be damaged by the added voltage. Instead use the SmallRig VB99 Mini V-Mount Battery's (99Wh) USB-C port which has PD(power Delivery) which is a smart interface that automatically adjusts the power output to match that of the connected device.

Q: 9. Does this come with a charger?

A: No, The SmallRig VB50 Mini V-Mount Battery does not include a charger. You will be able to work with any V-mount charger or Dtap charging solutions like BH #INPD1013 The battery also allows fast charging with USB PD (45w) chargers like BH #XCPDG165B

Q: 10. This battery is classified as "mini" Is this the same thing as "micro"? IE, will this battery fit in a micro V-mount plate?

A: The Smallrig VB50 battery is Mini or Micro size. The VB50 battery is only Dimensions (W x H x D) 4.1 x 2.9 x 1.4" at 1.6lbs weight, It is even smaller than other batteries listed as Mini size.