The cocoa E6 Directional Earset Mic, Highest Overload, with Detachable 1mm Cable and 3.5mm Connector for Toa Wireless Transmitters from Countryman is a vocal microphone with an adjustable boom that weighs less than one-tenth ounce. It can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 Earset virtually disappears against the skin, so performers forget they're wearing a mic. Three sensitivity options cover general speaking to extremely powerful vocals and four color options allow you to match the E6 to your skin tone for minimum visibility.

In addition, the E6 Earset features a pattern-changeable directional microphone for maximum isolation and gain before feedback, but is available as a water- and wind-resistant omnidirectional microphone too. This directional E6 Earset's cable terminates to a 3.5mm connector for direct connection to a Toa WM-370, WM-4310,WM-5320, or WM-5325 wireless bodypack transmitter.

For Vocals and General Speaking    Detachable 1mm Cable    3.5mm (TO), See Description    30 Hz to 15 kHz Frequency Response    Includes Cardioid & Hypercardioid Caps    Headroom for Strong Vocals    Windscreen    Cable Clips    Carrying Case

The Countryman E6 head-worn Earset is small and lightweight, and is hardly visible from a distance.

The E6 Earset's stainless steel boom is built tough and can be bent and re-bent many times to fit different performers. The E6 is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps.

The flexible boom is easily shaped right on the performer's face and is available in multiple skin tones. Their protective caps let you shape the frequency response for different situations or to match other microphones; caps for the directional earset adjust the pattern from cardioid to hypercardioid. Choose a sensitivity for speaking or singing with up to 145 dB SPL capability.

The E6 provides high-quality audio with low distortion and an SPL of up to 145 dB. It delivers rich, full band audio quality.

Easy adjustment keeps the mic in a position for rejecting unwanted sounds. Countryman's omnidirectional Earset offers a reduction of 12 dB compared to a lavalier mic, while the directional E6 Earset provides even more isolation. Excellent for houses of worship, theater, and outdoor events.

An E6 replacement cable installs in seconds. The snap-on cables are rugged and available for almost any wireless transmitter or for XLR inputs with phantom power.

For strong vocals.

Related Questions and Answers

Q: 1. What is the function of the top shoe? Thanks

A: The top shoe is designed on the Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon if you want to put a shoe mount flash on top of the camera while using the transmitter. Note, it is just a pass through. Meaning the shoe mount flash will be manual only, not TTL.

Q: 2. If I put this Godox receiver coupled with a Phottix Mitros+ Speedlite, can I control it from a Godox XProC TTL Wireless Controller ? (TTL and its functions, as well Manual)

A: Yes you can , TTL ,manual and HSS

Q: 3. If I use this on a Sony flash with the Godox transmitter, and a Godox flash with in-built receiver, will I have any issues with the two flashes syncing?

A: No, you would not hace a ny problema because hoy are swing the Godox tranmitter and receiver sostn for your camera brandy. In this case, Sony.

Q: 4. Planing to get this trigger and a Godox X1R-S. Would a Hss, TTL still work on Sony Hvl-f43m, Sony Hvl-f60m HSS?

A: the Godox X1T-S TTL Wireless Flash Trigger Transmitter for Sony BH #GOX1TS when used with a X1r-s can do TTL and HSS with Sony Flash HVL-F43 and FVL-F60.

Q: 5. Hi fellas, I have a Godox AD400Pro, the Xpro C transmitter & two Canon 600EXII-RT, and I'm trying to find out if this works. T

A: Yes, the Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon flashes will work with your Godox ad400 and will become part of the echo system and react as one.

Q: 6. Will this work with my Phottix Mitros speedlight?

A: You can use it with a Mitros speed light, however it only works with a Godox transmitter.

Q: 7. The YN685N specs say that it has 7 channels and 6 groups. However: 1. on mine only groups A,B andC are shown 2.the 622TX only shows groups A,B and C. How do I get access to control groups D and E?

A: You only have 6 groups and 16 channels when the flash is in 603 slave mode. Otherwise there are only 3 groups and 7 channels in all other modes that support groups/channels.

Q: 8. Will this trigger both the Canon 6000EXll-RT and EL-1?

A: Yes, the Godox X1R-C TTL Wireless Flash Trigger is compatible with both Canon E-TTL / E-TTL II protocol systems.

Q: 9. Can I use this for Olympus OME-EM1 II with Godox TT-600? Or Do you recommend the other model?

A: Its comparable for Nikon/Godox flashes

Q: 10. I have a Godox X2-N trigger, a Godox V1 and looking purchasing a Sekonic L308X-U light meter. Can a Godox X1R-N be used in combination with the Sekonic L308X-U to trigger the V1 to capture the exposure settings?

A: You could do it with a transmitter https://bhpho.to/2KmsMZn but not the receiver.