The Countryman E6i Omnidirectional Microphone is a miniature earset microphone for virtually invisible operation in stage performances, trade shows, houses-of-worship, auctions, lectures and much more.

The omnidirectional version is most common in applications where feedback issues are not very likely. The microphone can be worn without a windscreen as the omnidirectional capsule provides excellent wind noise rejection.

The E6i is set apart from the original E6 with its softer flexible boom and silicon ear-pads. The flexible boom provides ease of boom adjustability to accommodate multi-user applications.

A wide variety of colors and connections are available for use with various wireless transmitters. This version is black and features a Toa 1/8" (3.5mm) Mini connector for Toa transmitters.

Toa 1/8" (3.5mm) Mini for Toa    2mm Diameter Duramax Cable    Optimized for Strong Vocals    Omnidirectional    Black

A miniature omnidirectional capsule is mounted to a low-profile, flexible frame with silicon ear pads. This lightweight, unobtrusive design is available in various colors that virtually render the entire microphone invisible against the skin. For more information on which color earset suits you best, refer to the Countryman support page.

The included 2mm Diameter Duramax Cable detaches from the actual headset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy, as they are available in a wide selection of connections to accommodate various wireless transmitters. The Duramax 2mm diameter cable provides extra strength, flexibility and durability.

The omnidirectional polar pattern is most effective in minimizing wind noise, plosives (popping) and handling noise. The flexible boom provides a custom fit for multiple users and close microphone positioning while minimizing off-axis noise. The E6i is also available in a cardioid version for maximum off-axis noise rejection in environments with high feedback and noise.

This E6i's sensitivity response is optimized to accurately capture strong vocals without noise and distortion. The high headroom is well suited for singers and performers in stage and broadcast applications.

Related Questions and Answers

Q: 1. Will this tripod head fit on the oben at-3421 legs?

A: Yes. The Oben tripods have a reversible stud to accommodate 3/8 and 1/4 mount heads. This head has 3/8 threads for mounting.

Q: 2. Has anyone used this fluid head for at least a year regularly (say once a week) and can speak to its long-term performance?

A: On the sales floor at our NYC Superstore we have this model on display in the Pro Video department. Though this may not have been a production application, I have handled this model almost once a week to demonstarte to customers when this model was first released, and a lot of times customers handling it themselves exploring the Nitrotech feature of the head and it is still kicking strong.

Q: 3. Compatible for telephoto lens??? 600mm f/4 nikon???

A: The Sachtler 0705 FSB-8T Fluid Head will easily accommodate any Nikon camera with a Nikkor 600mm f/4 lens. It will be excellent for smooth video. Keep in mind however, while this is great for video and do a good job in still work, it cannot do verticals. You can spin telephoto lenses in the lens support collar. As for other lenses, you would need to use L brackets and adapter clamps.

Q: 4. How long is the line length?

A: It is a six-foot cable (1.83m) and therefore correctly described in the other answer. This cable is three feet shorter than that of the extension head for the original AD600 so as to reduce the voltage drop. Because of that, the effect on the intensity of the light is a drop of only about 0.1 stops, which is absolutely minimal and excellent! Now, if you want to mount this extension head more than six feet above the ground, you can typically attach the AD600 Pro to the riser (i.e. vertical column) your C-stand or strong light stand with a super clamp and snap-in pin (A.K.A. spigot) so that it is within six feet of the extension head. Super clamp: https://bhpho.to/38nkJ8J Spigot: https://bhpho.to/2G1MkA8

Q: 5. Do you have a suggestion for an area plate that would fit this top clamp and that is large enough for a camera and when turned 90 degrees can secure a tripod collar foot?

A: The Induro PU-60 Slide-In Quick Release Plate, BH # INPU60 is a suitable case. http://bhpho.to/3qHaEMJ

Q: 6. What is the diameter of the base?

A: The base diameter on the Benro B2 Triple Action Ball Head is 54mm.

Q: 7. Can this head hold a Blackmagic Ursa broadcast camera with shoulder mount handle, studio view finder, Fujinon XA220SX8, focus and zoom controls?

A: Yes, this fluid head has a load capacity of 8.8 to 26.4 lb and will handle your rig.

Q: 8. How well will this head work with Canon R5 and 600mm lens?

A: This tripod head works well with longer lenses such as the canon 600mm. It is a fluid head which helps create smooth motion. it also has drag control to increase/decrease the resistance as you pan and tilt. When using a tripod head like this it is best to make sure the lens/camera is balanced on the head (not too far backwards or forwards) to get optimal performance.

Q: 9. Does the quick release plate locking knob incorporate a safety mechanism, such as pull and twist, similar to what is found on some other Benro ball heads?

A: Actually, there is a safety mechanism: once the pressure has been relieved on the ball by untwisting the knob, the knob must be pulled out and twisted once more to release the plate. Look at the pictures, where this mechanism can be seen.

Q: 10. Will this be compatible with 'MeFoto WalkAbout S Aluminimum' Monopod?

A: You would need a bushing adapter to make it work. You can use this one. https://www.bhphotovideo.com/c/product/769749-REG/Oben_OB_1039_3_8_16_to_1_4_20_Reducer.html