You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Countryman E6 Omni Earset Mic, Medium Gain, With Detachable 1mm Cable And Ta4f Connector For Electro-voice Wireless Transmitters (tan)

Countryman E6 Omni Earset Mic, Medium Gain, With Detachable 1mm Cable And Ta4f Connector For Electro-voice Wireless Transmitters (tan)
  • Product Code: ga251210
  • Availability: In Stock

$1,244.97 $1,830.11

The tan E6 Omnidirectional Earset Mic, Medium Gain, with Detachable 1mm Cable and TA4F Connector for Electro-Voice Wireless Transmitters from Countryman is a vocal microphone with an adjustable boom that weighs less than one-tenth ounce. It is a water- and wind-resistant microphone that can be used on either ear for capturing audio in houses of worship, theater, or outdoor vocal and speech applications.

The low-profile, omnidirectional E6 Earset virtually disappears against the skin, so performers forget they're wearing a mic. Three sensitivity options cover general speaking to extremely powerful vocals and four color options allow you to match the E6 to your skin tone for minimum visibility.

In addition, the E6 Earset features three omni caps (very bright +8 dB, bright +4 dB, and flat +0 dB) that deliver response characteristics for most other applications such as recording flute and violin. The E6 Earset is available as a directional microphone too with cardioid and hypercardioid caps. This omnidirectional E6 Earset's cable terminates to a TA4F connector for direct connection to an Electro-Voice 2000 Series or 2500 Series wireless bodypack transmitter.

For Vocals and General Speaking    Detachable 1mm Cable    TA4F (EV), See Description    20 Hz to 20 kHz Frequency Response    Headroom for Strong Vocals    Includes +8, +4, and +0 dB EQ Caps    Windscreen    Cable Clips    Carrying Case

Key Specs
Compatible TransmittersElectro-Voice: MB2500, MSB
Polar PatternOmnidirectional
Frequency Response20 Hz to 20 kHz
Maximum SPL130 dB
SensitivityW6/6/Mid Gain for Speaking and Vocals (H6, E6, EM6, EM2)
Analog Output1x TA4F/Mini-XLR 4-Pin Female
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Microphone
Compatible TransmittersElectro-Voice: MB2500, MSB
Polar PatternOmnidirectional
Included Tone/Pattern Caps+4 dB Bright, +0 dB Flat, +8 dB Very Bright
Performance
Frequency Response20 Hz to 20 kHz
Maximum SPL130 dB
Sensitivity2 mV/Pa
SensitivityW6/6/Mid Gain for Speaking and Vocals (H6, E6, EM6, EM2)
Equivalent Noise Level29 dB (A-Weighted)
Connectivity
Analog Output1x TA4F/Mini-XLR 4-Pin Female
Cable Length5' / 1.52 m
Cable Diameter0.039" / 1 mm
Power
Power SourcesPlug-In Power
Operating Voltage1 to 2 V
Physical
ColorTan
Environmental ResistanceWater-Resistant with Included Housing (Unrated)
Weight0.07 oz / 2 g
Packaging Info
Package Weight0.5 lb
Box Dimensions (LxWxH)10 x 10 x 2"

The Countryman E6 head-worn Earset is small and lightweight, and is hardly visible from a distance.

The E6 Earset's stainless steel boom is built tough and can be bent and re-bent many times to fit different performers. The E6 is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps.

The flexible boom is easily shaped right on the performer's face and is available in multiple skin tones. Their protective caps let you shape the frequency response for different situations or to match other microphones; caps for the directional earset adjust the pattern from cardioid to hypercardioid. Choose a sensitivity for speaking or singing with up to 140 dB SPL capability.

The E6 provides high-quality audio with low distortion and an SPL of up to 140 dB. It delivers rich, full band audio quality.

Easy adjustment keeps the mic in a position for rejecting unwanted sounds. Countryman's omnidirectional Earset offers a reduction of 12 dB compared to a lavalier mic, while the directional E6 Earset provides even more isolation. Excellent for houses of worship, theater, and outdoor events.

An E6 replacement cable installs in seconds. The snap-on cables are rugged and available for almost any wireless transmitter or for XLR inputs with phantom power.

For speaking and vocals.

Related Questions and Answers

Q: 1. Will this work with the Alienbees Digibee flash? I have the Godox XproC trigger already.

A: If you already own the Godox XProC TTL Wireless Flash Trigger for Canon Cameras, then yes, you may use the Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon as a receiver connected to your AlienBee monolight for wireless triggering usage needs. The cables to connect to your monolight should be included with the X1R-C receiver.

Q: 2. Is the RM-WR1 wireless remote compatible with the Olympus TG-6 camera?

A: The OM SYSTEM RM-WR1 Wireless Remote Control is incompatible with the Olympus Tough TG-6 Digital Camera.

Q: 3. Will it handle transparency sheets? Can I print wirelessly from my computer?

A: I only use this printer wirelessly from three different computers. A Compaq, a Lenovo, and the afore mentioned iPad mini. Yes it is large, maximum print width is 13 inches. There has to be room for the print carriage to clear the paper at both ends. If you want large prints it takes a large printer.

Q: 4. Will the Godox X1R-N TTL wireless flash trigger receiver work with a Nikon D7200?

A: No this is a receiver only made for flash use you need to use the transmitter on your camera X1T

Q: 5. Will this work with z6ii and sb 5000?

A: Yes, the Nikon SU-800 Wireless Speedlight Commander Unit is compatible with both Nikon Z6 II Mirrorless Cameras as well as the Nikon SB-5000 AF Speedlights.

Q: 6. Will this allow me to use my Speedlite 470ex-ai wirelessly one my softbox off camera?

A: Yes this will allow you to use a Canon 470EX-AI off camera.

Q: 7. What is the smallest photo this will print?

A: The smallest paper this printer takes is 4 x 6. although you can print smaller images on the paper & trim it down.

Q: 8. Is this printer capable of manual duplexing?

A: Of course, just flip the paper over and reload it blank side up.

Q: 9. is this compatible metz 64 af-1?

A: The Godox X1R-C TTL Wireless Flash Receiver should work with no problems for pass through signal with Metz mecablitz 64 AF-1.

Q: 10. I use my Sony A7III with the Sony FA-WRC1M transmitter to fire my Sony HVL-F60RM. I want to add to this set a Godox AD200Pro. Is it possible to use the AD200Pro with this Godox X1R-S receiver and shoot with the Sony FA-WRC1M?

A: Unfortunately, the FA-WRC1M can only fire flashes that are equipped with a Sony FA-WRR1 Wireless Radio Receiver or have a Sony wireless receiver built in. The Godox X1 series works on a different frequency.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Countryman Isomax 2 All Purpose Microphone

$975.00 $1,452.75

Manfrotto Grid For 30" Ezybox

$204.09 $285.73

Products You May Like

Tiffen 6 X 4" Blue 5 Hard Edge Graduated Filter

$1,199.85 $1,727.78

Chrosziel 100-83mm Insert Ring

$210.00 $300.30

Jason Cases Jvc Ky-pz100 Robos 4-camera Case

$2,697.00 $3,775.80