The black GRW2012508 Rackworks Hinged Wall Mounted Rack from Gator Cases features a hinged back, double section, and welded frame construction. The rack consists of 18 gauge removable side panels with spring latches and an 18 gauge SPCC cold-rolled steel top and bottom. There are 11 gauge drilled and tapped front and rear rack rails, and the top is perforated to accommodate a fan. The rack U number is printed on the rack rails, and there is an 18 gauge solid steel door. There are 10/32 rack screws, a 5/8" knockout design for a VHF/UHF antenna, and a 10 x 10" rear access knockout for cables. Additional cable entry knockouts on the top and bottom include knockouts with 1/2", 5/8", 1.0", and 1 1/2" dimensions.

Front door features 18 gauge solid steel

Hinged back, double section, and welded frame construction

18 gauge removable side panels with spring latch

18 gauge SPCC cold-rolled steel top and bottom

Perforated top to accommodate fan

11 gauge drilled and tapped front and rear rack rails

Rack U number printed on the rack rails

10/32 rack screws

1/2", 5/8", 3/4", 1.0", and 1 1/2" cable entry knockouts on top and bottom

5/8" knockout design to be used for VHF/UHF antenna

10 x 10" rear access knockout for cable entry

Related Questions and Answers

Q: 1. Does this fit the G-PROR-8U-19 19" deep case?

A: The Gator Rackworks 1U Vented Sliding Rack Shelf features a depth of 14.8" so it will fit inside the Gator G-PRO-8U-19 8-Space Rotationally Molded Rack Case, which features a depth of 15.3".

Q: 2. Can this gator case fit a tricaster?

A: No . According to specs, the rack mount NewTek Tricasters sold here are 21.5 inches deep front to back. Actual usable rack depth on these Gator shallow cases is only 12-13 . They are made for small effects units,and compact amps such as an Eden WT550. You need a rack that is a 2RU ( rack unit top to bottom spec) (maybe 3RU for extra cooling if these run hot) and a usable 21.5 inches front to back.

Q: 3. Is the mounting depth adjustable?

A: The mounting depth on this unit is not adjustable.

Q: 4. How do I attach this Gator Rackworks 2U rack drawer to my rack case?

A: The Gator 2U drawer features built in rack ears and attaches with standard rack screws similar to other rack mountable equipment.

Q: 5. What is the best way to ventilate this unit? I've seen the 2U intake/exhaust systems, but that's going to quickly eat up rack space.

A: Aside from using a rack mounted fan the other best way is to leave the sides off, if that is an option.

Q: 6. IS THE LOCK AND KEY INCLUDED?

A: No lock and key

Q: 7. Does this have a rear rail?

A: Agreed, Robert A's answer is correct.

Q: 8. When I have my gear in the case would it be safe to take it onto a plane? Would the gear get damaged?

A: I would suggest using a floating rack for shock protection. I would not want this rack to be dropped from 4 feet in the air with my equipment in it. I also would be concerned with any case that doesn't have recessed hardware. The hardware could be knocked off the unit and then the doors will open.Will this unit survive a flight. Probably so. Will it possibly fail. There is a chance.

Q: 9. Carry on size ok for flying

A: Exterior Dimensions 14.5 x 21.25 x 13.75 (36.8 x 54.0 x 34.9 cm) (LxWxH) Please check with the individual airline for their requirements as they are subject to change and differ slightly from airline to airline:

Q: 10. Is the foam deep enough to hold a beltpack if placed towards to bottom along with a handheld ontop so i can have 4 of each wireless transmitters stored in the drawer?

A: The foam cut out depth is less than 2 inches, so that should work depending on the thickness of the belt pack transmitter/receiver.