The Countryman Isomax Headset Microphone is the original Countryman head-worn microphone and a favorite for both speech and performances. The Isomax features an omnidirectional polar pattern with a flexible boom for easy positioning and the sensitive capsule features a full 20 Hz to 20 kHz frequency response for full, clear audio reproduction.

The Isomax effectively rejects off-axis audio, minimizing feedback and residual noise. The flexible, adjustable band fits snugly and comfortably around the back of the head for concealed use on stage, during trade shows, speeches, sermons, etc.

A wide variety of colors and connections are available for use with various wireless transmitters. This version is black and features a 4-pin push-lock connector for use with Lightspeed wireless transmitters.

For Lightspeed Wireless Transmitters    Omnidirectional Polar Pattern    4-Pin Push-Lock Connector    Flexible, Telescoping Boom    High Rejection of Feedback    Black

A miniature omnidirectional capsule is mounted to a low-profile, adjustable headset. The Isomax is available in a variety of colors that match different skin tones, so you can select the version that is appropriate for your application.

The moisture-resistant capsule is protected against humidity, sweat, and makeup.

The Isomax is available in cardioid, hypercardioid, and omnidirectional polar patterns. This version features an omnidirectional pattern that provides a generous pickup area, and effectively minimizes handling and contact noise.

Related Questions and Answers

Q: 1. Does it work with Nikon DF?

A: If the DF supports the CLS system it should, and I imagne that the DF does. Basically it is a SB flash without the white light output.

Q: 2. Do you recommend using a mid-level spreader with this tripod? If so, which one?

A: The Manfrotto 645 FAST Twin Leg Video Tripod with Ultra L-Lock Mechanism (Carbon Fiber) does not work with mid-level spreaders. Here is ground spreader it works with. Manfrotto 165MV Ground Spreader for Spiked Tripod BH #MA165MV • MFR #165MV

Q: 3. Is this compatible with Sachtler aktiv8T Touch & Go Fluid Head?

A: No the Sachtler aktiv8T Touch & Go Fluid Head with SpeedLevel & 7-Step Drag for Sachtler Tripods (75mm) is not compatible with the Manfrotto 645 FAST Twin Leg Video Tripod with Ultra L-Lock Mechanism (Carbon Fiber). According to Sachtler the aktiv6 and aktiv8 fluid heads are compatible with Sachtler 75mm tripods (flowtech 75 aktiv, Tripod 75/2 AL, SpeedLock 75, ENG 75/2 D, DA 75L).

Q: 4. Do I need BOTH the trigger and the transmitter or can I use the built-in receiver of the SB700? Thanks!

A: You need to have a receiver for any flash that does not have a Godox X series receiver built in. The Nikon SB flashes do not have a receiver built for the Godox.

Q: 5. Does this trigger control power output while maintaining High speed syc with the Nikon SB910 speedlight while in manual mode? I may end up using A Godox strobe as my key light and speedlights as my fill lights.

A: I know this will work with Godox flashes I would do a test to see how it will work with the 910.

Q: 6. Will the receiver work with Nikon cameras with built-in transmitters? (Nikon D850)?

A: This can only work with Godox transmitters. It will not work with Nikon built in transmitters.

Q: 7. can the 75mm half ball (along with flat base fluid head 504X) be used with this tripod?

A: Yes, a 75mm half bowl and the included 100 to 75mm Bowl Adapter will allow you to use the Manfrotto 504X Fluid Video Head with Flat Base.

Q: 8. I want to add the SB600 flash to my Godox system. Do I need the X1R-N or the X1R-N trigger receiver?

A: The X1 has two components: the X1T (T stands for transmitter) and the X1R (R for receiver). To add non-Godox radio items to your Godox wireless system, get the X1R-N. To trigger and control Godox devices and items mounted on Godox receivers, get the X1T-N (N for Nikon).

Q: 9. Does this printer accept other ICC profiles? Does it allow you to use the option Photoshop manages color?

A: Yes it does! Depending on the paper u choose from u can download them. Canon already has its own icc profiles as well

Q: 10. When the X1 is on my camera can another flash be in the X1 hots shoe to operate when it's not being a transmitter? I have been reading and can't find the answer.

A: You can have a flash in the shoe. It can work while the X1 is transmitting.