The cocoa E6 Directional Earset Mic, Highest Overload, with Detachable 1mm Cable and Pigtail Leads Connector for Wireless Transmitters from Countryman is a vocal microphone with an adjustable boom that weighs less than one-tenth ounce. It can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 Earset virtually disappears against the skin, so performers forget they're wearing a mic. Three sensitivity options cover general speaking to extremely powerful vocals and four color options allow you to match the E6 to your skin tone for minimum visibility.

In addition, the E6 Earset features a pattern-changeable directional microphone for maximum isolation and gain before feedback, but is available as a water- and wind-resistant omnidirectional microphone too. This directional E6 Earset's cable terminates to a pigtail connector that is stripped and tinned (unterminated) with a two-wire connector for use with a wireless bodypack transmitter.

For Vocals and General Speaking    Detachable 1mm Cable    Pigtail Leads (NC), See Description    30 Hz to 15 kHz Frequency Response    Includes Cardioid & Hypercardioid Caps    Headroom for Strong Vocals    Windscreen    Cable Clips    Carrying Case

The Countryman E6 head-worn Earset is small and lightweight, and is hardly visible from a distance.

The E6 Earset's stainless steel boom is built tough and can be bent and re-bent many times to fit different performers. The E6 is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps.

The flexible boom is easily shaped right on the performer's face and is available in multiple skin tones. Their protective caps let you shape the frequency response for different situations or to match other microphones; caps for the directional earset adjust the pattern from cardioid to hypercardioid. Choose a sensitivity for speaking or singing with up to 145 dB SPL capability.

The E6 provides high-quality audio with low distortion and an SPL of up to 145 dB. It delivers rich, full band audio quality.

Easy adjustment keeps the mic in a position for rejecting unwanted sounds. Countryman's omnidirectional Earset offers a reduction of 12 dB compared to a lavalier mic, while the directional E6 Earset provides even more isolation. Excellent for houses of worship, theater, and outdoor events.

An E6 replacement cable installs in seconds. The snap-on cables are rugged and available for almost any wireless transmitter or for XLR inputs with phantom power.

For strong vocals.

Related Questions and Answers

Q: 1. Can you print on anything longer than 19 inches. I want to print panoramics.

A: Not with this printer- the printer software only goes to 13 x19 .

Q: 2. Does it work with Nikon Z7ii with 1 or 2 Nikon SB-700 AF Speedlight?

A: Yes, the Nikon SU-800 Wireless Speedlight Commander Unit will work with the Nikon Z7 II and the SB-700.

Q: 3. Is it compatible with D5200 ?

A: Yes, they are fully compatible.

Q: 4. Can I do HSS with this using a profoto acute 2 system?

A: No, you cannot. The only transmitters remote(s) that offer TTL and HSS capability with Profoto AirTTL support-compatible monolights would be Profoto Air Remote TTL-C for Canon, Profoto Air Remote TTL-F for Fujifilm, B&H # PRARTTLF, B&H # PRARTTL, Profoto Air Remote TTL-N for Nikon, B&H # PRARTTLN, Profoto Air Remote TTL-O for Olympus, B&H # PR901046, or the Profoto Air Remote TTL-S for Sony, B&H # PRARTTLS. You cannot use Godox remotes for TTL or HSS usage on Profoto strobe units.However, as stated above, the Profoto strobes would also have to be TTL-compatible with Profoto AirTTL support to fully work with the aforementioned remotes. The Profoto Acute 2 system is not a TTL-compatible system, and as such, you would not have either TTL or HSS compatibility when using the Profoto Acute 2 system. The only Profoto strobes that are AirTTL compatible would be the Profoto A1, B1, B1X, B2, and D2 strobe units, and the Profoto Pro-10 2400 AirTTL Power Pack.

Q: 5. is this compatible with nikon lite touch zoom (point and shoot) 140 ed and 70ws?

A: No, the Nikon ML-L3 Wireless Remote Control (Infrared) does not work with the Touch zoom 140 or 70ws.

Q: 6. will the x1 trigger a godox TT600 in TTL mode?

A: No, The Godox X1R-N TTL Wireless Flash Receiver for Nikon is not recommended for using with TTL enabled flash units. The recommended trigger for the Godox TT600 Thinklite Flash is the Godox X2 2.4 GHz TTL Wireless Flash Trigger for Nikon.

Q: 7. Does this printer come with ink when you buy it?

A: Yes

Q: 8. If I put this Godox receiver coupled with a Phottix Mitros+ Speedlite, can I control it from a Godox XProC TTL Wireless Controller ? (TTL and its functions, as well Manual)

A: Yes you can , TTL ,manual and HSS

Q: 9. Can this ML-L3 be configured to work with the SMD RFN4s receiver?.I lost the SMD RFN4s transmitter.

A: The ML-L3 is an optical remote shutter release which only works with select Nikon cameras.

Q: 10. I would like to use all pigment ink cartridges from the beginning. Will that work on this printer?

A: Only the PGBK Black the PGI-250 for this printer is pigment, all the other 5 inks c/m/y/k/g CLI-251 are dye based. Canon doesn't make any in pigment that fit this printer. Using aftermarket inks in my experience clogs the printheads. If you do it, it's @ your own risk.