The tan B6 Omnidirectional Lavalier Microphone, Very Low Sensitivity, with Hardwired TA5F Connector for Lectrosonics Wireless Transmitters from Countryman is a very small lav microphone measuring one tenth of an inch in diameter with changeable protective caps, which provide moisture resistance and color options. The mic can be used to capture audio for theater, broadcast, churches, and general lavalier applications.

Built with a low handling noise and rugged construction, the B6 lavalier microphone can be easily hidden in hair or on costumes, or taped to a performer's face. The aramid cable and ultra-thin diaphragm deliver a natural sound while its tiny size makes the B6 easy to position for ambient noise and feedback rejection. The B6's cable terminates to a TA5F connector for direct connection to a Lectrosonics M185 or M187 wireless bodypack transmitter.

Additionally, swappable protective caps let you shape the frequency response for different situations or match other microphones. The B6 microphone is resistant to makeup, sweat, and moisture when used with the supplied protective caps. These caps can be quickly removed for cleaning or replacement.

For Theater, Live, & Studio Use    Hardwired Connector    TA5F (LS), See Description    20 Hz to 20 kHz Frequency Response    Includes 3 Capsule Protection Grids    Headroom for Strong Vocals    Windscreen    Cable Clips    Carrying Case

Looks great when you want to see it, virtually disappears when you don't. The B6 is easily hidden in hair or on costumes, with five colors to match clothing, hair, and skin tones. Use a felt tip marker to color the white caps for near-perfect concealability. Never suffer the hassle and degraded sound quality of under-clothing miking again.

The B6 is resistant to makeup, sweat, and moisture when used with the supplied protective caps, and works well in hair or on the body. The protective caps are easily removed for cleaning or replacement, and the aramid-reinforced cable gives it world-class survivability.

The B6 provides high-quality audio with low distortion at SPL up to 140 dB on 48V phantom power. The aramid cable and thin diaphragm combine to offer low handling noise. The flat frequency response accurately captures voice or instruments, and the small size makes the B6 easy to position for ambient noise and feedback rejection.

Changeable protective caps let you shape the frequency response for different situations or to match other microphones. Versions are available for different speaking or singing styles, with high overload capability for recording instruments.

Very low, mic near user's mouth.

Related Questions and Answers

Q: 1. Can the Godox X1R-N be triggered by a Godox X1T-F? I don't need TTL capability, just a dumb trigger.

A: Yes

Q: 2. Does it work with Canon 5DIV and 600EX-RT II?

A: I have for Nikon. very good, I think the best of them is that they are not expensive and work great if you are starting in photography and you need triggers these are excellent, I have a few months using them and I have not had any kind of problem Tengo para NIKON. muy buenos, creo que lo mejor de ellos es que no son costoso y funcionan de maravilla si ests iniciando en la fotografa y necesitas disparadores estos son excelentes, ya tengo unos meses usndolos y no e tenido ningn tipo de problema

Q: 3. Will these Godox XN1Transmitter and receiver units work with the Nikon Z6 using the SB800 or SB600?

A: Yes they will work well

Q: 4. will the x1 trigger a godox TT600 in TTL mode?

A: No, The Godox X1R-N TTL Wireless Flash Receiver for Nikon is not recommended for using with TTL enabled flash units. The recommended trigger for the Godox TT600 Thinklite Flash is the Godox X2 2.4 GHz TTL Wireless Flash Trigger for Nikon.

Q: 5. Nikon in FP mode, will it fire this transmitter receiver in HIGH SPEED SYNC mode or must I buy three? One to ride the camera's hot shoe and two others, one for each flash?

A: you will need one X1T-N or X2TN on camera and 2 X1R-n receivers for your flashes

Q: 6. Hello. I have a set of yongnuo flashes yn560-IV dedicated for Canon. But they have built in 2.4 GHz transrecievers. I bought Sony a7 III. Do I need these receivers for all my flashes or it is enough if I will buy XPros Flash trigger? I use flashes on manual mode anyways, so I do not need any TTL stuff.

A: Radio wireless remote systems are not cross-brand compatible between Yongnuo and Godox. As such, a Godox X-Wireless Radio Transmitter will not directly communicate with the Yongnuo YN560-IV Speedlite Flash. If you wish to use the Godox XProS TTL Wireless Flash Trigger for Sony Cameras on the hot shoe of your Sony Alpha α7 III Mirrorless Digital Camera, you would have to purchase the Godox X1R-S TTL Wireless Flash Trigger Receiver for Sony for all Yongnuo flashes you wish to use off-camera. As you state your flash is dedicated for Canon, you would have to set the flash output manually on the flash.

Q: 7. I have a Sony A7 IV camera and a Nikon SB-910 flash. Wich Godox flash transmiter and receiver unit do I need?

A: We would suggest the Nikon system as it is more user friendly right out the box Godox XProN TTL Wireless Flash Trigger for Nikon Cameras BH #GOXPRON • MFR #XPRON https://bhpho.to/2IOWmE9 Godox X1R-N TTL Wireless Flash Trigger Receiver for Nikon BH #GOX1RN • MFR #X1R-N https://bhpho.to/3uYPT3Y

Q: 8. Will the ProN (Nikon) transmitter fire the 1XR-C (Canon) receiver with a 580 EXii?

A: You can fire a Canon 580EX II equipped with a Godox X1R-C from a Godox XPRO N trigger. However, only manual control is capable.

Q: 9. is this compatible metz 64 af-1?

A: The Godox X1R-C TTL Wireless Flash Receiver should work with no problems for pass through signal with Metz mecablitz 64 AF-1.

Q: 10. can this unit be used on a Nikon D 7100?

A: It really functions very well with NIKON SB 900 and 600. No problem!