The F122-2448-08 2" Thick Broadway Panel Control Columns (Gray) from Primacoustic is a set of high-density absorptive panels designed to provide an acoustic treatment where you want to control primary reflections, eliminate flutter echo, and reduce standing waves. A typical installation includes a series of these panels installed between the sound source and the listener, usually spread across a wall surface with space between each panel. This configuration allows energy to reflect back into the room to prevent deadening of the acoustic space and leaves a sense of balance and natural ambient acoustics.

The panels are easy to install on virtually any surface and feature a roman-pillar column-shaped design that is sure to match the aesthetic look of any environment. Its tall rectangular design makes it particularly well suited for installation in live-end and dead-end spaces, such as studios and home theaters. However, spreading multiple panels across a larger space, such as practice rooms or studios, can also be an economical choice for a larger installation.

This model is made from 6-pound-per-cubic-foot fiberglass and has a panel depth of 2". It also features beveled edges. The set includes (4) panels, which are sufficient for a total surface coverage of 32 square feet. Mounting the panels on Primacoustic's Offset Impalers can create a space between the panels and the mounting surface to further enhance the absorptive performance of this product.

Acoustic Treatment    Control Primary Reflections    Eliminate Flutter Echo    Reduce Standing Waves    Roman-Pillar Column Design    Easy Mounting on Any Surface    Small or Large Installations    High-Density Fiberglass

Use these panels to improve acoustics by controlling primary reflections, eliminating flutter echo, and reducing standing waves.

The panels can be mounted to virtually any surface.

This solution works equally well in small- or large-scale installations.

Related Questions and Answers

Q: 1. can this head be used manually as an underslung front control pan head?

A: The VariZoom VZ-MC100 Pan and Tilt Control System is designed to use with Jibs from Varizoom. It is controlled only with the included Joystick. If you wanted to use it on a tripod it does support this configuration. See image https://bit.ly/3Hc6vZ1

Q: 2. Hey. Planning on using this with my Kessler pocket jib. Any issues? Also how does this system get power? Thank for the insights in advance.

A: Assuming you have the Kessler Crane Pocket Jib (without Swivel Mount) B&H # KECJ1014 you have two capacities: 20 lb load capacity at full extension and 40 lb load capacity at minimum extension. The VariZoom VZ-MC100 Pan and Tilt Control System B&H # VAVZMC100 by itself weighs 8.5 lbs and can handle up to 25 lbs cameras. 25 + 8.5 = 33.5 lbs is within the minimum extension capacity of the Pocket Jib. You may have a rig that will total less than the 20 lbs of the full extension so you can go that way. Cabling comes out of the VariZoom for power and control. That cable, run along the jib, connects to the remote control box. You then connect power to the same box, either the supplied AC to DC power adapter or an optional 14.4v battery. Here is a link to the VariZoom manual. http://bit.ly/2oV3rdx

Q: 3. Will this work with rx100 m1? How about the rx100m5a?

A: Yes, will work for both.

Q: 4. Will this work with a Sony rx1?

A: As it works on multi terminal, it will work with RX1.

Q: 5. Will this control the zoom lens on a Panasonic HC-X1500?

A: The LanParte LRC-02 Remote Control for Panasonic Cameras is a LANC Controller, and the HC-X1500 uses LANC protocols. It should work; however, we are not aware of any specific tests done between the two to confirm if it will work or not.

Q: 6. Does lanc control work with the fx6? does touch to focus work?

A: The Lilliput HT7S 7" On-Camera Control Monitor with LANC Camera Control has no camera controls that work with the Sony FX6 whatsoever.

Q: 7. Will this work with the BGH1?

A: Technically the LanParte LRC-02 Remote Control for Panasonic Cameras should work with the Panasonic Lumix BGH1 Box Cinema Camera but it has not been tested by the either manufacture.

Q: 8. Does it work with Lumix G9 and is it accurate enough when using 2 cameras for high speed stereophotography?

A: Yes, the LanParte LRC-02 Remote Control for Panasonic Cameras is compatible on the Lumix G9. Wireless setups can have interference. So for two cameras and the specific situation you can get get things out of sync.

Q: 9. Will this remote work with Generation 3 Bluesound NODE?

A: Unfortunately the Bluesound RC1 Remote Control is only compatible with Bluesound Gen 2 & Gen 2i Devices.

Q: 10. Can you loop through HDMI input to SDI output?

A: The Lilliput HT7S 7" On-Camera Control Monitor with LANC Camera Control does allow for loop out with either HDMI or SDI.