The cocoa E6 Omnidirectional Earset Mic, Highest Overload, with Detachable 2mm Cable and Hirose 4-Pin Connector for Audio-Technica Wireless Transmitters from Countryman is a vocal microphone with an adjustable boom that weighs less than one-tenth ounce. It is a water- and wind-resistant microphone that can be used on either ear for capturing audio in houses of worship, theater, or outdoor vocal and speech applications.

The low-profile, omnidirectional E6 Earset virtually disappears against the skin, so performers forget they're wearing a mic. Three sensitivity options cover general speaking to extremely powerful vocals and four color options allow you to match the E6 to your skin tone for minimum visibility.

In addition, the E6 Earset features three omni caps (very bright +8 dB, bright +4 dB, and flat +0 dB) that deliver response characteristics for most other applications such as recording flute and violin. The E6 Earset is available as a directional microphone too with cardioid and hypercardioid caps. This omnidirectional E6 Earset's cable terminates to a Hirose 4-pin connector for direct connection to an Audio-Technica ATW-T1801, ATW-T27, ATW-T31, ATW-T51, ATW-T201, ATW-T210, ATW-T210a, ATW-T310, or ATW-T310b wireless bodypack transmitter for use with 200 Series, 1100 Series, 1400 Series, 1800 Series, 2000 Series, 2000A Series, 3000 Series, or 3000A Series wireless systems.

For Vocals and General Speaking    Detachable 2mm Cable    Hirose 4-Pin (AT), See Description    20 Hz to 20 kHz Frequency Response    Headroom for Strong Vocals    Includes +8, +4, and +0 dB EQ Caps    Windscreen    Cable Clips    Carrying Case

The Countryman E6 head-worn Earset is small and lightweight, and is hardly visible from a distance.

The E6 Earset's stainless steel boom is built tough and can be bent and re-bent many times to fit different performers. The E6 is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps.

The flexible boom is easily shaped right on the performer's face and is available in multiple skin tones. Their protective caps let you shape the frequency response for different situations or to match other microphones; caps for the directional earset adjust the pattern from cardioid to hypercardioid. Choose a sensitivity for speaking or singing with up to 140 dB SPL capability.

The E6 provides high-quality audio with low distortion and an SPL of up to 140 dB. It delivers rich, full band audio quality.

Easy adjustment keeps the mic in a position for rejecting unwanted sounds. Countryman's omnidirectional Earset offers a reduction of 12 dB compared to a lavalier mic, while the directional E6 Earset provides even more isolation. Excellent for houses of worship, theater, and outdoor events.

An E6 replacement cable installs in seconds. The snap-on cables are rugged and available for almost any wireless transmitter or for XLR inputs with phantom power.

For strong vocals.

Related Questions and Answers

Q: 1. If I don' t have a computer. Does this printer need to be connected to a computer to print pictures, or can I print from a USB flash drive?

A: You would need a computer to set up the printer, and connect it to your wireless network. Once that is done you can print wirelessly from an Android, iOS, or Wireless PictBridge device. You cannot print directly from a USB storage device.

Q: 2. Is this compatible with the Sony a6300 & a6500?

A: Yes, the Godox X1T-S TTL Wireless Flash Trigger Transmitter for Sony, B&H # GOX1TS, is compatible for use with the Sony Multi-Interface hot shoe used on the Sony Alpha a6300 and a6500 Mirrorless Digital Camera.

Q: 3. I want to know if this remote is compatible with a Nikon D300s?

A: Don't buy this remote, it never worked for me

Q: 4. Is this flash essentially the Yongnuo 568-EX with the YN622N transceiver built in?

A: No, it isn't. When off-camera, without a separate 622 TTL trigger, the YN685 does not give you TTL functionality. It will allow you to shoot in manual or multi mode, but the auto zoom feature will not work and TTL metering won't work. You can trigger the flash with a 603 or 622 transceiver, but will need a 622 for full TTL functionality.

Q: 5. Is this compatable with the Nikon D5100?

A: Yes, this remote is compatible with the Nikon D5100 camera.

Q: 6. Does Nikon or Vello have a similar product / cost...for the Nikon D7100? Thank you.

A: The ML-L3 is compatible with the D7100.

Q: 7. Is This compatible with Flash Canon 600 ?

A: If you own the Canon 600EX-RT flash unit, yes it is compatible with the Godox X1T-C TTL trigger unit. The unit's hotshoe is designed for the Canon.

Q: 8. compatible with nikon D500?

A: This remote will not work. However, this one will. Nikon WR-T10 Wireless Remote Controller Transmitter B&H # NIWRT10

Q: 9. Su 800 they work with sb 5000

A: Yes it does.In fact this is the only way to get the flash to work off the hot shoe. The WR-10, radio remote is not currently compatible with SB5000, I found out after getting Nikon help desk on phone!

Q: 10. Will YN-622N-TX sitting on the camera control zoom on YN-685 remotely?

A: Yes it works perfect.