The tan E6 Directional Earset Mic, Highest Gain, with Detachable 1mm Cable and LEMO 4-Pin Connector for Telex Wireless Transmitters from Countryman is a vocal microphone with an adjustable boom that weighs less than one-tenth ounce. It can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 Earset virtually disappears against the skin, so performers forget they're wearing a mic. Three sensitivity options cover general speaking to extremely powerful vocals and four color options allow you to match the E6 to your skin tone for minimum visibility.

In addition, the E6 Earset features a pattern-changeable directional microphone for maximum isolation and gain before feedback, but is available as a water- and wind-resistant omnidirectional microphone too. This directional E6 Earset's cable terminates to a LEMO 4-pin connector for direct connection to a Telex WT-200, WT-400, or WT-450 wireless bodypack transmitter.

For Vocals and General Speaking    Detachable 1mm Cable    LEMO 4-Pin (TL), See Description    30 Hz to 15 kHz Frequency Response    Includes Cardioid & Hypercardioid Caps    Headroom for Strong Vocals    Windscreen    Cable Clips    Carrying Case

The Countryman E6 head-worn Earset is small and lightweight, and is hardly visible from a distance.

The E6 Earset's stainless steel boom is built tough and can be bent and re-bent many times to fit different performers. The E6 is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps.

The flexible boom is easily shaped right on the performer's face and is available in multiple skin tones. Their protective caps let you shape the frequency response for different situations or to match other microphones; caps for the directional earset adjust the pattern from cardioid to hypercardioid. Choose a sensitivity for speaking or singing with up to 145 dB SPL capability.

The E6 provides high-quality audio with low distortion and an SPL of up to 145 dB. It delivers rich, full band audio quality.

Easy adjustment keeps the mic in a position for rejecting unwanted sounds. Countryman's omnidirectional Earset offers a reduction of 12 dB compared to a lavalier mic, while the directional E6 Earset provides even more isolation. Excellent for houses of worship, theater, and outdoor events.

An E6 replacement cable installs in seconds. The snap-on cables are rugged and available for almost any wireless transmitter or for XLR inputs with phantom power.

For general speaking.

Related Questions and Answers

Q: 1. hi, does it work with the nikon d800e?, and I have 2 nikon flashes the sb-700 and an older one, would it work with both units? at the same time?thanks

A: The D800e has the flash commander mode built into it, and thus there is no need to purchase this device to use with it. The D800e can trigger any flash models which are compatible with the i-TTL wireless system, including the SB600, SB700, SB800, SB900, SB910. Page 185 of the D800e's instruction manual details how to set the camera up to trigger these flash units. If you would like to confirm if your orlder one is compatible, please send an email to askbh@bhphoto.com and our agents there can confirm its compatibility.

Q: 2. Would this work as a receiver for a manual yongnuo flash? If so what features would I have?

A: No you will need a transmitter on camera and a receiver on the flash. Yongnuo makes them.

Q: 3. Is it compatible with the Nikon D5200?

A: Yes, the ML-L3 is fully compatible with the D5200 camera.

Q: 4. I have NikonD7100 and my speedlight is Godox V860II, does this trigger work well for my camera and if in future I wanna add Nikon flashes like Nikon sb700, Do you think it will be ok for the trigger?

A: buy the x1t-n that is the one you need this one is a receiver the other one is the transmitter it is a great trigger system and your flash have built in receiver and transmitter so it will work flawless. unless you want to trigger another flash with your v860II then this is the one you need.

Q: 5. I have SB-28 speed lights and I cannot get them to fire when mounted on the hot shoe of the X1-R. Is a sync cord the only option?

A: While Godox does not have a official list, from testing and trouble shooting we have come to the conclusion the the SB-28 is not compatible.

Q: 6. would this work with an Interfit badger unleashed flash head?

A: Yes. But the strobe must be driven in manual mode.

Q: 7. While using the Canon version X1ttl trigger with AD200, can you use a a Canon 600EX in the hot shoe on the X1? What features would be usable with the 600EX system? The included manual does not say anything about how the hot shoe works.

A: The trigger will work with the 600ex-rt flash. I have one and when you place a flash unit on the hot shoe, it becomes the A group. You can then control the flash mode (TTL, Manual, etc) and the power down to 1/128. So in short Yes!

Q: 8. Can the X1 trigger multiple flash units simultaneously, by, say, splitting the cable? I always do manual exposure control.

A: The Godox X1R-N TTL Wireless Flash Receiver for Nikon is only a receiver. If you have multiple units connect to non Godox flashes you can trigger all of them simultaneously. This unit is also use as a trigger for Nikon cameras. If you have a Godox flash connected to the camera hot shoe and other Godox flash units off camera, you can trigger all of them by connecting the camera with the remote cable that comes with the Godox X1R-N TTL Wireless Flash Receiver for Nikon. You will need to set your on camera flash as a transmitter.

Q: 9. Does Nikon or Vello have a similar product / cost...for the Nikon D7100? Thank you.

A: The ML-L3 is compatible with the D7100.

Q: 10. How will this printer work with my iMac?

A: Just for laughs I tried printing from an iPad Mini with out setting up the iPad with the software and I opened, turned on and started printing quite quickly. It was a printed document. I have not tried printing images from the iPad.