Sold as a pair, the white JBL Control 226CT is a passive 6.5" coaxial ceiling loudspeaker with a multi-tap transformer designed for voice amplification and foreground music reproduction in a variety of venues ranging from boardrooms to bistros. The low-saturation transformer features a baffle-mounted impedance switch that allows the Control 226CT to be driven by 70V/100V or 8-Ohm power amplifiers (available separately). Each Control 226CT is equipped with a durable 6.5" Kevlar-reinforced woofer and a 1" exit titanium compression driver, yielding a frequency response of 74 Hz to 17 kHz, and a long-term power capacity of 150W.

The high-slope crossover network ensures natural midrange tonality and proper frequency distribution to the speaker components. Removable locking input connectors, press-in grilles, and C-ring / tile rail suspension systems contribute to easy installation.

Passive Design    6.5" Kevlar-Reinforced Woofer    1" Exit Compression Driver    150W Long-Term Power Capacity    For 70V/100V or 8-Ohm Power Amplifiers    Multi-Tap Transformer    74 Hz to 17 kHz Frequency Response    High-Slope Crossover Network    Removable Locking Input Connectors    Includes Grilles, C-Rings & Tile Rails

In-ceiling coaxial loudspeakers with integrated backcans

Includes press-in grilles and C-ring / tile rail suspension systems

Consistent 120° broadband pattern control

Multi-tap transformer enables use with 70V/100V constant-voltage systems

Foreground music solution with discreet, minimized visual impact for boardroom, reception areas, restaurants, airports, and retail applications

150W (600W peak) power handling

Durable 6.5" Kevlar-reinforced woofer

1" exit titanium compression driver

74 Hz to 17 kHz frequency response (±3 dB), 47 Hz to 19 kHz frequency range (-10 dB)

18 dB/octave crossover network with high- and low-pass filtering

Low-saturation 68W multi-tap transformer with 70V/100V settings and an 8-Ohm bypass mode

Removable locking 2-pin input connection

Integrated backcan

Related Questions and Answers

Q: 1. do they come with a owner manual on a D3100 ?

A: I will never buy from B&H again. How’s that?

Q: 2. will the opteka fisheye lens work with the nikon d3400 camera?

A: Hi the i don't know because my is Nikon D3200 it work great

Q: 3. Does this lens create a circular fisheye image on a full-frame camera such as the Nikon D610?

A: The image would be nearly circular but because the lens was made for APS-C size (crop frame) sensors, the inside barrel of the lens would be visible in most photos. This Nikon 8-15mm fisheye zoom would be a better option: https://bhpho.to/3t8qi4G

Q: 4. When i move the docus ring nothing happens ? Do you have same issue?

A: in fish eye lenses you don't se the focus changing that much , you would be best to pre focus

Q: 5. This lens covers 180. Is that dimension horizontal or diagonal?

A: On an FX camera, it's a circular image, so it doesn't matter.On a DX camera the top and bottom are cut off a little.

Q: 6. does this work for canon rebel t6i?

A: Yes it should work just fine.

Q: 7. Will this work for d33?

A: If you are referring to the Nikon D3300, then yes the Opteka 6.5mm f/3.5 Circular Fisheye Lens for Nikon F will be compatible with that camera.

Q: 8. can I use this on my canon 5d mark III ?

A: Yes you can. Warning mine was defective, the focus on it doesnt work contacted opteka 6 months ago and Ive yet to receive a replacement. Theyve also decided to ignore all my email. Im still under warranty.

Q: 9. Is it made in Japan?

A: The Opteka 6.5mm f/3.5 Fisheye Lens for Canon EF is now made in China.

Q: 10. Will this lenses work with my canon rebel eos xsi?

A: For full frame FX formats just take off the lens hood. You will get a circular image on the edges of the photograph. Nice effect