The small khaki Safari Photo Vest from CampCo is a 100% cotton vest that has 21 pockets, ranging in size from pen sized to oversized. The vented back and mesh liner allow free movement of air around the body. The snap epaulets will keep the camera, binoculars, or tote bag straps on the shoulder. The vest has a heavy-duty zipper that will close the entire front. It also has a single snap closure for the front and two snap adjustments for the sides. The vest is built oversized to accommodate fully filled pockets.

The Safari vest has a large pocket at the bottom back with two snaps; inside there is a large lined pocket that will keep sweat or rain from dampening papers. There are slash pockets on either side of the vest. On the right side from the top down, a shirt sized, bellows pocket with "hook & loop" fastening with two 'D' rings and a vertical zipper pocket with water resistant lining. A set of three pockets, one over the other with the smallest being net is closed with a "hook & clamp" loop, suitable for film or batteries, filters, lenses etc.

100% Cotton Shell and Lining    Webbed Back    21 Pockets

100% cotton vest with a vented back and mesh liner allows free movement of air around the body

Snap epaulets will keep the camera, binoculars, or tote bag straps on the shoulder

Zipper that will close the entire front

Single snap closure for the front and two snap adjustments for the sides

• 21 assorted pockets
• One large pocket at the bottom back with two snaps
• Inside there is one large lined pocket
• One huge flat buttoned pocket on the back of the vest
• Two slash pockets on the sides
• One shirt sized bellows pocket with two 'D' rings
• One vertical outside zipper pocket with water resistant lining
• Three pockets, one over the other with the smallest being made of net
• One large, lined zipper pocket behind two deep narrow bellows pockets
• One zipper pocket with a ring and snap for keys.
• One large, deep pocket with elastic at the top
• One slanted lined zipper pocket with a place for pen or small flashlight
• One large, deep, open pocket
• One lined pocket with three places for pens or small flashlights

Related Questions and Answers

Q: 1. Will the printer print in black, even if a color cartridge runs out of ink?

A: No it needs all inks.

Q: 2. Is printer Wireless?

A: This Epson Expression Photo XP-970 Small-In-One Inkjet Printer, would have a wireless printing option.

Q: 3. Can I use non Epson ink?

A: That will be your decision. For the best printing experience, we recommend you use Epson inks with your Epson printer.

Q: 4. Could I fly a Canon C70 with a cage and lens with this rig?

A: Glide Gear SNC100 Snorricam DSLR Vest Harness wouldn't be strong enough to hold that kit.

Q: 5. would this unit handle a Panasonic AG-CX350 ok? The camera weighs in at 4.19lbs

A: Yes it will. This stabilizer handles a 7.5 lb payload.

Q: 6. How does the scanning quality rate? Can I scan quickly? How many photos can I scan in one hours time? And can i save the scans directly to my external hard drive to avoid thing up space on my macbook?

A: Scanner is great even for photos. You can scan up to 4800 dpi. Speed is all pending on the dpi you scan, the higher the dpi the slower your scan. It also depends on your computer processor, ram, & hard-drive speeds. By setting up the scanning on your computer you can select to save the scans even on a external drive.

Q: 7. What is the largest image you can scan on this printer?

A: Scan Bed Size: 8.5" x 11.7" (Max.); Paper Sizes: 3.5" x 5", A4, 4" x 6", 5" x 7", 8" x 10", 8.5" x 11", 11" x 17", A4, B5, A5, A6, half letter, executive; Maximum Print Resolution: 5760 x 1440 optimized dpi

Q: 8. Does this printer have a USB connection?

A: Yes, the Epson Expression Photo XP-970 Small-In-One Inkjet Printer has a USB-B connection.

Q: 9. What is the heaviest and the lightest weights of paper that can be used in this printer without high risk of jamming?

A: Plain paper: 17 lb (64 g/m2) to 24 lb (90 g/m2) see user manual pg. 343 https://www.bhphotovideo.com/lit_files/584766.pdf

Q: 10. Is it possible the makers of Flycam Redking will be making a tripod head as an accessory so the camera can be used interchangeable with the Flycam and a tripod using the same tripod plate? That seems to be a given?

A: At the moment (4/29/21), Flycam does not make a tripod head that is interchangeable with their stabilizers. However, you can mount a dovetail on this baseplate and another dovetail on a different tripod head. That way, you will be able to use a baseplate that slides onto both dovetails.