The cocoa E6 Directional Earset Mic, Highest Overload, with Detachable 1mm Cable and 2.5mm Locking Connector for Lectrosonics Wireless Transmitters from Countryman is a vocal microphone with an adjustable boom that weighs less than one-tenth ounce. It can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 Earset virtually disappears against the skin, so performers forget they're wearing a mic. Three sensitivity options cover general speaking to extremely powerful vocals and four color options allow you to match the E6 to your skin tone for minimum visibility.

In addition, the E6 Earset features a pattern-changeable directional microphone for maximum isolation and gain before feedback, but is available as a water- and wind-resistant omnidirectional microphone too. This directional E6 Earset's cable terminates to a 2.5mm locking connector for direct connection to an Lectrosonics M170 or M175 wireless bodypack transmitter.

For Vocals and General Speaking    Detachable 1mm Cable    2.5mm Locking (L2), See Description    30 Hz to 15 kHz Frequency Response    Includes Cardioid & Hypercardioid Caps    Headroom for Strong Vocals    Windscreen    Cable Clips    Carrying Case

The Countryman E6 head-worn Earset is small and lightweight, and is hardly visible from a distance.

The E6 Earset's stainless steel boom is built tough and can be bent and re-bent many times to fit different performers. The E6 is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps.

The flexible boom is easily shaped right on the performer's face and is available in multiple skin tones. Their protective caps let you shape the frequency response for different situations or to match other microphones; caps for the directional earset adjust the pattern from cardioid to hypercardioid. Choose a sensitivity for speaking or singing with up to 145 dB SPL capability.

The E6 provides high-quality audio with low distortion and an SPL of up to 145 dB. It delivers rich, full band audio quality.

Easy adjustment keeps the mic in a position for rejecting unwanted sounds. Countryman's omnidirectional Earset offers a reduction of 12 dB compared to a lavalier mic, while the directional E6 Earset provides even more isolation. Excellent for houses of worship, theater, and outdoor events.

An E6 replacement cable installs in seconds. The snap-on cables are rugged and available for almost any wireless transmitter or for XLR inputs with phantom power.

For strong vocals

Related Questions and Answers

Q: 1. Is this printer capable of manual duplexing?

A: Of course, just flip the paper over and reload it blank side up.

Q: 2. Hello! I have a Nikon D810 and a SB-700 (so far I have been working with the pop up flash in commander mode). I need a second flash unit and was considering the YN685. Does the YN685 work off camera on TTL mode when triggered by the pop-up flash of the Nikon D-810? Would I need a radio transmitter to control both flashes? In this case, can both flashes be set to TTL mode? Your answers would be very much appreciated!!! Thanks!

A: No the YN 685 wont fire with you built in flash. if you want to have your sb 700 and the yn685 working both off camera you will need a pair of these: https://a href= http://www.bhphotovideo.com/c/product/1190877-REG/yongnuo_yn_622n_kit_yn_622n_i_ttl_wireless_transceiver.html target= _blank www.bhphotovideo.com/c/product/1190877-REG/yongnuo_yn_622n_kit_yn_622n_i_ttl_wireless_transceiver.html/aas the yn685 already has the built in wireless.

Q: 3. Does it work off the inferred/flash thing or it is radio?

A: This commander would work with infrared, where the Nikon flashes would need to be within line of sight.

Q: 4. Can I use the x1r-n to trigger a D300 using a hand held xpro-n? If so do you know what cable I would need?

A: The Godox system is awesome. There is another trigger R2 FlashPoint if you want to do High Speed Sync. Don't leave hone with out it... If you are using Godox SB's with a Godox master on the camera you will not require it, however if you are just managing groups is worth it.

Q: 5. Does this printer accept other ICC profiles? Does it allow you to use the option Photoshop manages color?

A: Yes it does! Depending on the paper u choose from u can download them. Canon already has its own icc profiles as well

Q: 6. Can I do HSS with this using a profoto acute 2 system?

A: No, you cannot. The only transmitters remote(s) that offer TTL and HSS capability with Profoto AirTTL support-compatible monolights would be Profoto Air Remote TTL-C for Canon, Profoto Air Remote TTL-F for Fujifilm, B&H # PRARTTLF, B&H # PRARTTL, Profoto Air Remote TTL-N for Nikon, B&H # PRARTTLN, Profoto Air Remote TTL-O for Olympus, B&H # PR901046, or the Profoto Air Remote TTL-S for Sony, B&H # PRARTTLS. You cannot use Godox remotes for TTL or HSS usage on Profoto strobe units.However, as stated above, the Profoto strobes would also have to be TTL-compatible with Profoto AirTTL support to fully work with the aforementioned remotes. The Profoto Acute 2 system is not a TTL-compatible system, and as such, you would not have either TTL or HSS compatibility when using the Profoto Acute 2 system. The only Profoto strobes that are AirTTL compatible would be the Profoto A1, B1, B1X, B2, and D2 strobe units, and the Profoto Pro-10 2400 AirTTL Power Pack.

Q: 7. Can this trigger and control the Godox AD600 pro?

A: Yes! The Godox R2 and R2 Pro triggers all work with the AD600 Pro and the Godox/Flashpoint ecosystem.

Q: 8. Will this work with the Alienbees Digibee flash? I have the Godox XproC trigger already.

A: If you already own the Godox XProC TTL Wireless Flash Trigger for Canon Cameras, then yes, you may use the Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon as a receiver connected to your AlienBee monolight for wireless triggering usage needs. The cables to connect to your monolight should be included with the X1R-C receiver.

Q: 9. Does this printer driver support Mac OS Big Sur 11.1?

A: Yes, the Canon PIXMA iP8720 Wireless Inkjet Photo Printer BH #CAIP8720 is compatible with Big Sur.

Q: 10. Is this a radio or optical transmitter?

A: The Nikon SU-800 Wireless Speedlight Commander Unit is an infrared transmitter.