The black Countryman E6X Directional Earset Mic, Standard Gain with Detachable 2mm Cable and 3.5mm locking Connector for Sennheiser Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6X earset's cable terminates to a 3.5mm locking connector for direct connection to Sennheiser SK 2020-D wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Sennheiser Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this unit work with the Vello Freewave Fusion Pro? Idea: SU-800 would sit on the transmitter and settings would be transmitted via radio signal to the other Nikon flashes sitting on Vello Fusion Pro receivers.Thank you

A: The SU-800 would not be compatible with the Vello Freewave Fusion Pro. The SU-800 is an IR commander, and would not be able to fire a radio receiver.

Q: 2. So, I have the newer Pro trigger but I also have a Sony TTL flash - can I use this trigger as a receiver (since it has a hotshoe on top)?

A: No , You need Godox X1R-S to use as a receiver

Q: 3. I just bought an SB-910 flash and I did not know that my Nikon D3200 does not have the commander mode. I also have an older D5000 and would like to know if the SU-800 Commander would allow me to shoot the new flash wirelessly with these cameras... Is that possible?

A: Yes, the SU-800 would be allow you to trigger Nikon flashes wireless with the D3200 and D5000 cameras.

Q: 4. Will this controller work to trigger off camera flash in high speed sync with this combo?

A: Yes. Just shot off-camera using this combo on my 5Dmkii all the way to 1/8000. No problem.

Q: 5. I can use this to trigger via IR my Yongnuo 568EX in S1 or S2 mode, but I don't seem to be able to get it to trigger my YN685. I do not want to use a radio trigger. Is there a way to get the YN685 to work? Is there a list of Yongnuo speed lights that will work like the YN568EX?

A: Sorry, I do not believe there is any way to trigger the YN685 optically and keep all of the control capabilities. If you are wanting to stay with Yongnuo flashes, then the 568, 565, and 510 series should all work. You can do a search for all optical wireless flashes to see the entire list of all brands.Hope this helped.

Q: 6. does this printer have a paper feed tray on the back like the canon pro-100?

A: No this would not.

Q: 7. Can I use this to trigger the new Canon Speedlite EL-1off-camera via Godox XProC?

A: Yes, the Godox X1R-C TTL Wireless Flash Receiver for Canon can be used on the Canon Speedlite EL-1 to trigger, and you will need the Godox XProC TTL Wireless Flash Trigger for Canon Cameras on the camera.

Q: 8. Can I use this for Olympus OME-EM1 II with Godox TT-600? Or Do you recommend the other model?

A: Its comparable for Nikon/Godox flashes

Q: 9. will this work for both the godox ad200 and godox 850 ving? I have the xt16 receiver for the 850 ving

A: As the Godox VING V850II Li-Ion Flash Kit and the Godox AD200 TTL Pocket Flash Kit both have the built-in 2.4 GHz Wireless X System Receiver, yes, both flashes will be compatible for use with the Godox X1T-N TTL Wireless Flash Trigger Transmitter for Nikon.

Q: 10. Will this work with my Phottix Mitros speedlight?

A: You can use it with a Mitros speed light, however it only works with a Godox transmitter.