The tan Countryman E6X Directional Earset Mic, Standard Gain with Detachable 1mm Cable and 3.5mm locking Connector for Sony Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6X earset's cable terminates to a 3.5mm locking connector for direct connection to Sony ZTX-B01 and ZTX-B02RC wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Sony Transmitters    Headroom for General Speaking    Detachable 1mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Does this work as a shutter release as well as the flash trigger on a XT2?

A: Yes it will as long as you buy the unit for your camera brand, I use Canons and it works flawlessly. All version of the X1T work the same.

Q: 2. are they compatible with Impact PowerSync16-80 Transceiver?

A: No, the Godox X1T-C TTL Wireless Flash Trigger Transmitter for Canon is not compatible for use with the Impact PowerSync16-80 Transceiver.

Q: 3. Will this trigger wirelessly my Canon 600EX-RT flash units in TTL+HSS with the Godox receivers?

A: Cant say for the 600EX-RT, but it works fine for my 580 EX II.

Q: 4. Does this work with the GFX?

A: If you upgrade the firmware on the X1T-F to v03, it is compatible with the GFX 50s.

Q: 5. Will the Sony version of the X1T transmitter function fully with Nikon version Godox flash. Basically does Godox flashes work across different transmitters for different brand systems.

A: Im not entirely sure but that is my understanding.

Q: 6. Can I use the X1N trigger as Commander to 2 SB-900s & an SB-500? Or would I have to trigger one of them to trigger the other 2? But then that would be a manual setting for each?

A: When I shot with Nikons, I had several SB900's. It is my understanding that they are optically triggered. The sensor is on the right side of the unit viewed from the back. The x1N is a RF unit. It does not have an optical output. If you wanted to operate the SB's, there is a receiver that can accomodate the SB's and that would allow the X1N to operate them. The real advantage to doing that would be the operating distance goes out to about 300 feet. So, putting the flash behind the subject would work well, when using the optical trigger would be difficult. Hope this helps.

Q: 7. Will this system work on SB 800 set on manual exposure? Or does it have to be set on TTL?

A: The SB-800 can be used in both TTL and manual when using this Godox trigger.

Q: 8. Will this Godox work with the Flashpoint controller?

A: Yes, the Godox 2.4 GHz X-wireless receiver would be compatible for use with a Flashpoint 2.4 GHz X-wireless transmitter or flash with a built-in transmitter.

Q: 9. Would this work as a receiver for a manual yongnuo flash? If so what features would I have?

A: No you will need a transmitter on camera and a receiver on the flash. Yongnuo makes them.

Q: 10. Can I trigger theX1N on an SB900 with the X2N trigger on my D500?

A: Yes