The black Countryman E6X Directional Earset Mic, Low Gain with Detachable 2mm Cable and 3.5mm locking Connector for Happie Amp or Empower Sound Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6X earset's cable terminates to a 3.5mm locking connector for direct connection to Happie Amp or Empower Sound and Amazing Amp wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Happie Amp or Empower Sound Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. So, I have the newer Pro trigger but I also have a Sony TTL flash - can I use this trigger as a receiver (since it has a hotshoe on top)?

A: No , You need Godox X1R-S to use as a receiver

Q: 2. I have a Nikon D5200, a Yongnuo 685 and a Nikon sb-28 speedlite. I would like to be able to fire the 2 flash units that I have and a 3rd, not as yet obtained flash. What controller / transceiver / flash do I need to make this happen? Cost is a concern. mtb

A: If you already own the Yongnuo YN685 Wireless TTL Speedlite and Wireless Flash Controller Kit for Nikon Cameras, the Youngnuo YN-622N-TX i-TTL Wireless Flash Controller for Nikon (B&H # YOYN622NTX) included in the kit would be able to wirelessly trigger the Yongnuo YN685 Wireless TTL Speedlite for Nikon Cameras. You may purchase the Yongnuo i-TTL Transceiver YN622N II for Nikon Cameras (2-Pack), B&H # YOYN622NII, which you may connect to the bottom of your Nikon SB-28 Speedlight Flash and your third speedlight flash for your wireless radio triggering usage needs.

Q: 3. will this work for both the godox ad200 and godox 850 ving? I have the xt16 receiver for the 850 ving

A: As the Godox VING V850II Li-Ion Flash Kit and the Godox AD200 TTL Pocket Flash Kit both have the built-in 2.4 GHz Wireless X System Receiver, yes, both flashes will be compatible for use with the Godox X1T-N TTL Wireless Flash Trigger Transmitter for Nikon.

Q: 4. Is this compatible with the Nikon Z9?

A: The Godox X1R-N TTL Wireless Flash Receiver for Nikon BH #GOX1RN is a receiver and would require a transmitter like the XPro to be used on the camera.

Q: 5. Does Godox x1t-c have af beam assist?

A: Yes , the Godox X1t-C Does have BEAM ASSIT which is located on the front of the unit's ON/ OFF switch ( Right hand side of unit .... Cheers and good Transmitting Friend !!!

Q: 6. Is it compatible with D5?

A: I don't know, but it works fine on my D750 andD7000.Jim

Q: 7. Can I trigger theX1N on an SB900 with the X2N trigger on my D500?

A: Yes

Q: 8. Does this trigger have focus assist?

A: Yes this transmitter has focus assist.

Q: 9. Does this work as a shutter release as well as the flash trigger on a XT2?

A: Yes it will as long as you buy the unit for your camera brand, I use Canons and it works flawlessly. All version of the X1T work the same.

Q: 10. Will this unit work with the Vello Freewave Fusion Pro? Idea: SU-800 would sit on the transmitter and settings would be transmitted via radio signal to the other Nikon flashes sitting on Vello Fusion Pro receivers.Thank you

A: The SU-800 would not be compatible with the Vello Freewave Fusion Pro. The SU-800 is an IR commander, and would not be able to fire a radio receiver.