The cocoa Countryman E6X Omnidirectional Earset Mic, Low Gain with Detachable 2mm Cable and 6-pin Hirose Connector for Samson Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a 6-pin Hirose connector for direct connection to Samson BT3, CT2, TX4, and UT4 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Samson Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. does it work with Phottix ?

A: It may vary depending on the Phottix product in question. I would recommend contacting photo@bhphoto.com and let them know the specific item to ensure compatibility.

Q: 2. can you trigger the transmitter through its pc socket? Want to use it with LF lens with a PC connection.

A: Yes you can, you will need to use what's called long pc

Q: 3. Do I need BOTH the trigger and the transmitter or can I use the built-in receiver of the SB700? Thanks!

A: You need to have a receiver for any flash that does not have a Godox X series receiver built in. The Nikon SB flashes do not have a receiver built for the Godox.

Q: 4. Do you need to purchase the receiver if you are using with the TT685?

A: No, works directly with the TT685.

Q: 5. hello! does it allowes to work my camera in semiautomatic modes? like mode A, mode S??? also might I control this receiver from my camera?

A: If using either the Godox XPro N or X1T-N transmitters to fire your flash with the X1R-N receiver attached to it, you can work in Aperture or Shutter Priority modes on your camera.

Q: 6. Do I need to buy two of these? One for camera and one for flash? Or do I just need one for the camera?

A: One for the camera , this is a trigger , if you have Godox flash you do not need a receiver if you are using other brand flash than you need this Godox X1R-S TTL Wireless Flash Trigger Receiver for Sony BH #GOX1RS

Q: 7. nikon sb-800?

A: If using a Godox transmitter on camera this receiver will work when attached to a SB-800.

Q: 8. I read that this can trigger camera shutters - I have no interest in using this receiver with flashes. Will this hold up to PocketWizards in triggering remote cameras at sports games? How's the delay and can it trigger bursts?

A: It will work as a remote shutter. Chances are the Pocketwizard is faster than that one. But it should come close. You will need a transmitter to go with that. If you do not have one you have these options, https://bhpho.to/3iuFGoJ

Q: 9. Can i use this trigger on the Sunpak df4000U? I have a Sony A7ii. Thanks

A: The Godox X1R-S TTL Wireless Flash Receiver for Sony BH #GOX1RS can be used as a manual receiver for the Sunpak DF4000U. You will need a transmitter on the camera.

Q: 10. Does Godox x1t-c have af beam assist?

A: Yes , the Godox X1t-C Does have BEAM ASSIT which is located on the front of the unit's ON/ OFF switch ( Right hand side of unit .... Cheers and good Transmitting Friend !!!