The black Countryman E6 Directional Earset Mic, Low Gain with Detachable 2mm Cable and 3.5mm Locking Connector for Olympus, Roland, Sony, Tascam, Yamaha, or Zoom Portable Recorders is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a 3.5mm locking connector for direct connection to Olympus, Roland, Sony, Tascam, Yamaha, or Zoom DM-420, DM-520, DM-620, DS-2400, DS-40, DS-51, DS-61, DS-71, LS-10, LS-14, R05, R09HR, PCM-D50, PCM-M10, DR-05, DR-07mkII, DR-08, PR-10, Pocketrak C24, Pocketrak W24, H1, H2, and H2n portable recorders.

For Stage, Theater, and Broadcast TV    Fits Select 3.5mm Recorders    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this Olympus lens fit a canon rebel t5?

A: Not directly. You would need to also purchase an adapter for a four-thirds lens to the Canon EF camera. I have no experience with the combination, but I suspect that it won't be optimal.

Q: 2. Does this unit have a still store? How about fan noise, is there any?

A: The V-1HD does not have a still store feature. There is a fan but reportedly it is so quiet, mics do not hear it.

Q: 3. can it be use for Facebook Live Streaming? can it also accept 1080 24p?

A: I used this:https://a href= http://www.bhphotovideo.com/c/product/1091826-REG/decimator_dd_hx_hdmi_sdi_cross_converter_with.html target= _blank www.bhphotovideo.com/c/product/1091826-REG/decimator_dd_hx_hdmi_sdi_cross_converter_with.html/ado convert 24 fps to 60 fps

Q: 4. Good day! Is this product compatible with all NTSC camera for input line and NTSC projector for out put ? Pls advice ! Sorry Im begginers for this works!

A: Basically any NTSC with a HDMI input can go into the switcher. All inputs must be the same resolution/frame rate as it does not scale. As long as your projector will accept HDMI you should be fine on the output. Remember HDMI cables have a relatively short distance, if you need long runs you will need to get an HDMI extender, usually runs CAT6 between the transmitter and receiver.This is a great basic product that is very easy to setup and operate.

Q: 5. I've heard this mixer isn't compatible with Cerevo encoders. Can you confirm?

A: We have not had any issues with Cerevo pairings, except for some newer gear that processes h.265, which would then have issues when using this switcher.

Q: 6. Can this production switcher handle 2-2.5k footage?

A: The max resolution that this switcher can handle is 1080p, it does not work with a 2k or 2.5k signal I'm afraid. We do have the ATEM Production Studio 4k, which can handle a UHD 3840 x 2160 signal. However even that model does not offer support for 2k or 2.5k, those are not resolutions supported by production switchers in general at this time.

Q: 7. I am looking at purchasing for use during a live sporting event (with the output being sent to a big screen). In terms of replay capabilities, does anyone have any experience here? Can you simply use the freeze button and then continue rolling from the point or can you only switch back to the live source? Cheers

A: NO. the freeze button freezes the source as a frame (snapshot) and goes back to live source. It cant be used for replay...

Q: 8. What does it mean when the HDMI input keeps blinking white when I feed from my computer? It does not show anything.

A: The most common reason for blinking input lights are a disconnected or bad cable, as noted in the previous answer. However, you will also get this if your computer is outputting the wrong resolution or frame rate. Unlike many monitors, the V-1HD unit cannot scale resolutions. Instead, it only accepts 720p (if the FORMAT switch on the back is 720p) or 1080i/1080p (interchangeably, if the format switch on the back is 1080i/1080p), which are the common HDTV resolutions. Similarly, your computer output must match the frame rate selected in SETUP (50 or 59.94 Hz, although 60Hz is close enough to 59.94). Unlike most TV sources, computers can output video at a lot of different resolutions and frame rates, and so if you get either of them wrong (check your computer's video settings!) the V-1HD won't be able to use the signal and will give you a blinky button. I use my V-1HDs with computer sources all of the time, but am very careful to keep the computer's video output at 1080p/60 at all times.

Q: 9. Can I stream with this switcher by sending the video feed to my laptop and thru YouTube or Ustream or do I need streaming hardware?

A: The streaming hardware IS actually your laptop. But you will need some kind of a HDMI input device for your laptop. I use a blackmagic usb3 device to get the hdmi signal into the laptop. And then you will need some kind of streaming software. I hope this helps. Brent

Q: 10. Will this lense work on my Olympus E-5 camera? I have a 40-150mm basic lense and I need to upgrade to one that will film better under the lights at a football game with a lot of action shots.

A: Yes, the Olympus 50-200mm f/2.8-3.5 lens for Olympus Digital Cameras is compatible with the Olympus E-5.