The light beige Countryman E6i Omnidirectional Earset Mic, Medium Gain with Detachable 2mm Cable and 3.5mm locking Connector for Sony Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a 3.5mm locking connector for direct connection to Sony ZTX-B01 and ZTX-B02RC wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Sony Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Can I use the Godox X1R for Sony TTL Wireless Flash Receiver with a Godox XR1 Canon transmitter? I have a spare Sony flash and would like to use it on my Canon system.

A: Godox receivers must match the brand of flash they are under Godox transmitters must match the brand of camera they are on. They have a limited ability to communicate between brands for example a Canon camera and transmitter can sync with a Nikon receiver and flash.

Q: 2. If i connect the X1r-N to a non godox strobe via the 2.5 jack and fire it with a X1pro, will i be able to change the strobe power remotly? or it will just fire it.

A: No , it will just fire it.

Q: 3. How different is it from Broncolor RFS 2.2 N Transceiver for Nikon?

A: This transmitter can only fire the Godox shoe mount flash and monolights which have their X series receiver built into it or with an X1R receiver attached to it. The Broncolor RFS 2.2N only works on the frequency of the Broncolor RFS system in their flash heads.

Q: 4. Can I use a Vivitar 283 with the Godox X1? Worried about frying the electronics.

A: Dont know as I dont have a Vivitar

Q: 5. can I use this for off-camera flash usages? I have a EF-42 flash and can't find a off-camera cable for it.

A: You will need to replace your EF-42 with a Godox flash, the TT350F or the TT685F are the models that will work with this transmitter and allow for TTL function.

Q: 6. Will this work with fuji x100v?

A: Yes, it will work with the X100V.

Q: 7. Can the Godox X1R-N be triggered by a Godox X1T-F? I don't need TTL capability, just a dumb trigger.

A: Yes

Q: 8. Is this compatible with Sony ZV-1?

A: Yes, the Godox X1T-S TTL Wireless Flash Trigger Transmitter for Sony sh0ould be compatible for use with the Multi Interface shoe on the top of the Sony ZV-1 Digital Camera (Black).

Q: 9. Can these be triggered with the XProN (Nikon) trigger? I want to use Yongnuo flashes (that are compatible with Nikon cameras) in these receivers and trigger them with the XProN trigger I have for my camera (from Godox).

A: Yes, the XproN will trigger this receiver.

Q: 10. Will this transmitter/receiver set work with my Nikon Z50 and SB-500 flash?

A: This should work with a Z50 and a SB-5000, but you may have to do firmware updates.