The tan Countryman E6i Omnidirectional Earset Mic, Medium Gain with Detachable 2mm Cable and 2.5mm waterproof locking Connector for Lectrosonics Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a 2.5mm waterproof locking connector for direct connection to Lectrosonics WM wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Lectrosonics Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. I am asking about paper weight as well. In addition to photo papers I want to use 65 lb card stock for photo note cards. Please don't answer with how thick the paper can be- I am asking about the weight- and can't accurately measure the thickness of a single sheet of paper (and it's not on the packaging, either). Can I use this printer for 65 lb paper?

A: yes.. we use up to 140 pound ..it's the best!!! only downside is that the ink is super expensive!

Q: 2. Is this compatible with the Sony a6300 & a6500?

A: Yes, the Godox X1T-S TTL Wireless Flash Trigger Transmitter for Sony, B&H # GOX1TS, is compatible for use with the Sony Multi-Interface hot shoe used on the Sony Alpha a6300 and a6500 Mirrorless Digital Camera.

Q: 3. will it be absolutely compatible with nissin i40, TTL HSS?

A: Unfortunately, Nissin does not produce an Air R Receiver for the i40 with the Micro 4/3 interface at this time. That being said, this transmitter cannot trigger the flash wirelessly in TTL or HSS.

Q: 4. Is it compatible with Nikon 1 AW1 ?

A: The Nikon ML-L3 is compatible with the Nikon AW1, yes.

Q: 5. Does the SU-800 work with the new D500?

A: Absolutely.

Q: 6. It worked a couple of times after receiving it, then stopped for no reason I can tell. Any suggestions? I have a Nikon D40.

A: Make sure your set up,is working you must have wifi in the area so it will work ! I have no problems with it if I have Wifi ! I now also use my phone with a App

Q: 7. If i connect the X1r-N to a non godox strobe via the 2.5 jack and fire it with a X1pro, will i be able to change the strobe power remotly? or it will just fire it.

A: No , it will just fire it.

Q: 8. Can you spread legs to wide setting?

A: The Minimum Working Height of the Benro Induro Hydra 2 Waterproof Carbon Fiber Series #2 Tripod is 13.2" / 33.6 cm. The legs can't be spread further to lower the tripod.

Q: 9. I have three of these receivers. After six months one has stopped working. How long can I expect the others to last? Godox have been no use. Do I need to switch over to pocket wizards now or inevitably later?

A: These have a one year warranty that B&H covers. As for longevity they can last very long if taken care of my personal ones are a couple years old now.

Q: 10. Can I use the Godox X1R for Sony TTL Wireless Flash Receiver with a Godox XR1 Canon transmitter? I have a spare Sony flash and would like to use it on my Canon system.

A: Godox receivers must match the brand of flash they are under Godox transmitters must match the brand of camera they are on. They have a limited ability to communicate between brands for example a Canon camera and transmitter can sync with a Nikon receiver and flash.