The black Countryman E6i Omnidirectional Earset Mic, Low Gain with Detachable 2mm Cable and 4-pin Hirose Connector for Azden Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a 4-pin Hirose connector for direct connection to Azden UHF 41BT wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Azden Transmitters    Headroom for Strong Vocals    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Is it compatible with Nikon 1 AW1 ?

A: The Nikon ML-L3 is compatible with the Nikon AW1, yes.

Q: 2. I have a Sony A7 IV camera and a Nikon SB-910 flash. Wich Godox flash transmiter and receiver unit do I need?

A: We would suggest the Nikon system as it is more user friendly right out the box Godox XProN TTL Wireless Flash Trigger for Nikon Cameras BH #GOXPRON • MFR #XPRON https://bhpho.to/2IOWmE9 Godox X1R-N TTL Wireless Flash Trigger Receiver for Nikon BH #GOX1RN • MFR #X1R-N https://bhpho.to/3uYPT3Y

Q: 3. Does the SU-800 work with the new D500?

A: Absolutely.

Q: 4. If i connect the X1r-N to a non godox strobe via the 2.5 jack and fire it with a X1pro, will i be able to change the strobe power remotly? or it will just fire it.

A: No , it will just fire it.

Q: 5. Is it compatible with the Nikon D5200?

A: Yes, the ML-L3 is fully compatible with the D5200 camera.

Q: 6. Can I use this with one on camera flash and 2 off camera flashes? Would I need 1 transmitter and 2 receivers? Nikon D850 and 3 SB-700s

A: You will need a transmitter for the camera and one receiver per off camera flash.

Q: 7. I have a Nikon D3300 and a Altura speedlite for nikon, will this Gordox Trigger & Receiver set work in TTL mode, or must I set my flash power level independently?

A: While this Godox trigger system can trigger Nikon compatible flashes in TTL mode, it has not been tested with the Altura Speedlights for Nikon, therefore we cannot account for their compatibility. Your results may vary.

Q: 8. My understanding is that the transmitter can’t force the SB700 to fire at anything higher more powerful than 1/4, is this correct?

A: This transmitter will not work with the SB700

Q: 9. Is this compatible with the D3200?

A: The SU-800 is compatible with the Nikon D3200, yes.

Q: 10. how do i get to use the sb-5000 radio romote not line of site?

A: If you own the Nikon D5, D850, D500, or the Nikon D7500 DSLR camera, and the Nikon Z6 or Z7 Mirrorless Digital Cameras (the only current Nikon DSLR cameras that are compatible with the wireless radio feature in the Nikon SB-5000 Speedlight Flash), Nikon WR-R10 Wireless Remote Controller, B&H # NIWRR10 and the Nikon WR-A10 Wireless Remote Adapter, B&H # NIWRA10, to trigger flash wirelessly using Nikon's radio-controlled Advanced Wireless Lighting system. The Nikon WR-R10 Wireless Remote Controller is needed by all of the above cameras to communicate with the Nikon SB-5000 Speedlight Flash; the Nikon D5, D850, and D500 all also require the Nikon WR-A10 Wireless Remote Adapter, which allows you to connect the WR-R10 to the camera.