The black Countryman E6 Omnidirectional Earset Mic, Medium Gain with Detachable 1mm Cable and LEMO 3-Pin Connector for WisyCom Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a LEMO 3-pin connector for direct connection to WisyCom MTP30, MTP40, MTP40S, MTP41, and MTP41S wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits WisyCom Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Does it works with the Nikon Sb 700 without the receiver? or will it need the receiver?

A: The Godox X1R-N receiver, BH # GOX1RN is needed. https://bhpho.to/2LOILD4

Q: 2. Can the X1 trigger multiple flash units simultaneously, by, say, splitting the cable? I always do manual exposure control.

A: The Godox X1R-N TTL Wireless Flash Receiver for Nikon is only a receiver. If you have multiple units connect to non Godox flashes you can trigger all of them simultaneously. This unit is also use as a trigger for Nikon cameras. If you have a Godox flash connected to the camera hot shoe and other Godox flash units off camera, you can trigger all of them by connecting the camera with the remote cable that comes with the Godox X1R-N TTL Wireless Flash Receiver for Nikon. You will need to set your on camera flash as a transmitter.

Q: 3. Can I attach this to my interfit S1 stobe and Fire it with my XProN? I use two TT685 mainly but once in awhile I need the Interfit strobe. Thanks in advance

A: You can use them however you will only be able to shoot manual under sync speed.

Q: 4. Can I use those with:1) Canon T6i and2) AmazonBasics Electronic Flash for DSLR Cameras??Thank you

A: I have not used either of those components with the flash trigger system. If the pieces are TTL compatible they may work but I can not confirm they acceptable substitutes.

Q: 5. can I plug this in a 220v socket?

A: I did. No problems.

Q: 6. Is this compatible with the d500

A: Yes.

Q: 7. Will this work with the D850?

A: SU-800 works perfectly with D850. The shoe is the same as any Nikon flash.

Q: 8. I have a canon eos sl3. This camera doesn't have the center contact for it to work with normal strobe syncs. If I get this, would it work fine and would I need to get a reserve as well?

A: This X1T-C would already have the current firmware in order to be compatible with the Canon EOS SL3. As for getting a reserve X1T-C unit, that would be a wise decision in case the primary unit fails during use.

Q: 9. will the x1 trigger a godox TT600 in TTL mode?

A: No, The Godox X1R-N TTL Wireless Flash Receiver for Nikon is not recommended for using with TTL enabled flash units. The recommended trigger for the Godox TT600 Thinklite Flash is the Godox X2 2.4 GHz TTL Wireless Flash Trigger for Nikon.

Q: 10. Hi fellas, I have a Godox AD400Pro, the Xpro C transmitter & two Canon 600EXII-RT, and I'm trying to find out if this works. T

A: Yes, the Godox X1R-C TTL Wireless Flash Trigger Receiver for Canon flashes will work with your Godox ad400 and will become part of the echo system and react as one.