The cocoa Countryman E6 Omnidirectional Earset Mic, Medium Gain with Detachable 1mm Cable and 2.5mm Waterproof Locking Connector for Lectrosonics Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a 2.5mm waterproof locking connector for direct connection to Lectrosonics WM wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Lectrosonics Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Does it works with the Nikon Sb 700 without the receiver? or will it need the receiver?

A: The Godox X1R-N receiver, BH # GOX1RN is needed. https://bhpho.to/2LOILD4

Q: 2. Is the center column on the Hydra 2 tripod removable?

A: Yes, the Benro Induro Hydra 2 Waterproof Carbon Fiber Series #2 Tripod center column can be removed and inverted for low level shooting.

Q: 3. Will this work with the D850?

A: SU-800 works perfectly with D850. The shoe is the same as any Nikon flash.

Q: 4. I have a canon eos sl3. This camera doesn't have the center contact for it to work with normal strobe syncs. If I get this, would it work fine and would I need to get a reserve as well?

A: This X1T-C would already have the current firmware in order to be compatible with the Canon EOS SL3. As for getting a reserve X1T-C unit, that would be a wise decision in case the primary unit fails during use.

Q: 5. can I plug this in a 220v socket?

A: I did. No problems.

Q: 6. Is this compatible with v350c?

A: Yes you can use a V350C off camera with this transmitter on the camera.

Q: 7. Can Godox X1T-C Transmitter trigger Yongnuo YN600 RT and/or YN600RTII? Iask this since Yongnuo flashes behave exactly like if they were identical to Canon similar flashes in Canon EOS 6D.

A: You need a YN-E3-RT https://bhpho.to/2L6T2tf for the YN600RT.

Q: 8. Can this work with Godox X pro?

A: This unit like the Godox X Pro is a transmitter, so they cannot work together. One of those units can only trigger an X1R-S receiver attach to a Sony compatible flash.

Q: 9. Can I attach this to my interfit S1 stobe and Fire it with my XProN? I use two TT685 mainly but once in awhile I need the Interfit strobe. Thanks in advance

A: You can use them however you will only be able to shoot manual under sync speed.

Q: 10. Is this printer capable of manual duplexing?

A: Of course, just flip the paper over and reload it blank side up.