The black Countryman E6i Directional Earset Mic, Medium Gain with Detachable 2mm Cable and 1/4" Connector for Line 6 Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6i earset's cable terminates to a 1/4" connector for direct connection to Line 6 TBP06 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Line 6 Transmitters    Headroom for Speaking and Vocals    Detachable 2mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Is this compatible with Sony ZV-1?

A: Yes, the Godox X1T-S TTL Wireless Flash Trigger Transmitter for Sony sh0ould be compatible for use with the Multi Interface shoe on the top of the Sony ZV-1 Digital Camera (Black).

Q: 2. With my Sony A7RIV and Godox X1R-S be able to sync with my Sony HVL-F60RM2 and my Godox AD400Pro & AD300Pro?

A: You will need a XPro or X2 transmitter for on the camera, a receiver for the Sony brand flash. The Godox flashes have the receiver built in.

Q: 3. I have a panaasonic G9 and GX8,I am thinking this will only work in manual mode, only thing I can do is adjust power levels on flashes like the Ad200 or TT600, Am I correct?

A: Yes Correct

Q: 4. Does this support rear sync HSS through the air r receivers on sony flashes?

A: Yes this will support rear curtain sync and HSS through the Air R receivers on a Sony flash.

Q: 5. While using the Canon version X1ttl trigger with AD200, can you use a a Canon 600EX in the hot shoe on the X1? What features would be usable with the 600EX system? The included manual does not say anything about how the hot shoe works.

A: The trigger will work with the 600ex-rt flash. I have one and when you place a flash unit on the hot shoe, it becomes the A group. You can then control the flash mode (TTL, Manual, etc) and the power down to 1/128. So in short Yes!

Q: 6. Can this be use to pit a Yongnuo flash on the hot shoe?

A: This transmitter can accept a Yongnuo flash such as the Yongnuo YN320EX S Speedlite, which has a Multi-Interface type foot.

Q: 7. Is this compatible with the d500

A: Yes.

Q: 8. Does it fully support d 750?

A: I don't have the D750, but I'm sure it will work just fine. It works great with my D300s.

Q: 9. Can I use this with one on camera flash and 2 off camera flashes? Would I need 1 transmitter and 2 receivers? Nikon D850 and 3 SB-700s

A: You will need a transmitter for the camera and one receiver per off camera flash.

Q: 10. Can Godox X1T-C Transmitter trigger Yongnuo YN600 RT and/or YN600RTII? Iask this since Yongnuo flashes behave exactly like if they were identical to Canon similar flashes in Canon EOS 6D.

A: You need a YN-E3-RT https://bhpho.to/2L6T2tf for the YN600RT.