The tan Countryman E6 Directional Earset Mic, Low Gain with Detachable 1mm Cable and TA4F Connector for CAD Audio Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a TA4F connector for direct connection to CAD Audio WX155A wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits CAD Audio Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Does the SU-800 have overheat circuitry protection which prevents it from being used over and over? I have been using the D810's pop-up flash to trigger off-camera flashes for focus stacking, but the D810's circuitry prevents it from firing too frequently for too long, which really slows down the process. Ideally, I'd like to be able to take 100+ shots in a row, only a second or two between exposures.

A: Since this Commander Unit only sends a small pulse of light to trigger a Nikon flash, it is not subject to overheating as much as a flash would be.

Q: 2. Can the X1 trigger multiple flash units simultaneously, by, say, splitting the cable? I always do manual exposure control.

A: The Godox X1R-N TTL Wireless Flash Receiver for Nikon is only a receiver. If you have multiple units connect to non Godox flashes you can trigger all of them simultaneously. This unit is also use as a trigger for Nikon cameras. If you have a Godox flash connected to the camera hot shoe and other Godox flash units off camera, you can trigger all of them by connecting the camera with the remote cable that comes with the Godox X1R-N TTL Wireless Flash Receiver for Nikon. You will need to set your on camera flash as a transmitter.

Q: 3. My understanding is that the transmitter can’t force the SB700 to fire at anything higher more powerful than 1/4, is this correct?

A: This transmitter will not work with the SB700

Q: 4. When using this trigger to manually control flash output, does it still do a pre-flash (the Odin's do this) prior to firing?

A: I never do pre-flashes, when I start shooting I turn on my flash I test the light than start shooting

Q: 5. Hi,I want to ask if it is possible to use YN-685 on-camera to fire Nikon flash set on the YN-622N trigger (eg. on the light stand) so they fire simultaneously? Is that possible please?Thank youMario

A: Unfortunately, no, the setup you describe above would not work as you describe. The YN685 for Nikon does not directly provide any radio master functions as it only has a built-in radio receiver, not a transmitter or transceiver. As such, it may only be used wirelessly off-camera for radio triggering usage needs when a YN-622N-TX, YN-622N / II, YN560-TX, YN560IV, YN660 RF-605, or RF-603 II transmitters are used on the camera as a master transmitter. You may either connect an additional YN-622N transceiver on the camera's hot shoe (with the YN-685 on top of the unit) for your usage needs, or use one of the Nikon flashes on the YN-622N on the camera's hot shoe, and use the built-in radio in the YN-685 for use as your off-camera flash.

Q: 6. Fuji x t-4 compatibility?

A: This is compatible with the XT-4.

Q: 7. I have a Nikon D3300 and a Altura speedlite for nikon, will this Gordox Trigger & Receiver set work in TTL mode, or must I set my flash power level independently?

A: While this Godox trigger system can trigger Nikon compatible flashes in TTL mode, it has not been tested with the Altura Speedlights for Nikon, therefore we cannot account for their compatibility. Your results may vary.

Q: 8. Does it fully support d 750?

A: I don't have the D750, but I'm sure it will work just fine. It works great with my D300s.

Q: 9. Will this trigger a Godox V860IIF ?

A: While off camera the Godox V860 will accept a signal from any of the Godox X1 or XPro transmitters. You Can TTL HSS and adjust power just like it was native. Its only when a Godox flash is on the camera shoe that the brand version matters.

Q: 10. Does this work with the a6000?

A: Yes, this trigger works with the Sony A6000.