The tan Countryman E6 Omnidirectional Earset Mic, Standard Gain with Detachable 1mm Cable and LEMO 3-Pin Connector for WisyCom Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6 earset's cable terminates to a LEMO 3-pin connector for direct connection to WisyCom MTP30, MTP40, MTP40S, MTP41, and MTP41S wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits WisyCom Transmitters    Headroom for General Speaking    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Does this work with Sony a7riii?

A: Yes it works with Sony A7R III

Q: 2. Because I did not see a receiver for Godox X1T-O TTL. Is there a receiver for Panasonic Godox X1T-O TTL, or will it work with the receiver for Canon or Sony?

A: I use the Godox X1T-O trigger with three Godox TT685O strobes. Honestly, I didn't try to mix it with other brands nor flash models. The wireless control is excellent. I have no complaints.

Q: 3. I have the Godox X1T (O) on my Panasonic GH5. Will this item allow me to remote flash my Nikon SB800 flash when using my GH5?

A: The Godox X series system can fire a flash in manual so long as the camera transmitter match and the remote and flash match.

Q: 4. Will the Sony version of the X1T transmitter function fully with Nikon version Godox flash. Basically does Godox flashes work across different transmitters for different brand systems.

A: Im not entirely sure but that is my understanding.

Q: 5. How does the 1 year limited warranty work when the unit stops working?

A: If youre not outside of the warranty, contact the manufacturer for replacement.

Q: 6. Will it works in TTL mode with Nikon F100?

A: Ill be completely honest about this product... it only flashes 1 out of every 3 times I take a picture, even if i wait a full min between shots. There is a TTL setting, but it never worked for me, and I had to use Manual. I sincerely hope people spend the 300-500$ and get a Nikon flash, otherwise they might have a paperweight like I now have.

Q: 7. Can I use the Godox X1R for Sony TTL Wireless Flash Receiver with a Godox XR1 Canon transmitter? I have a spare Sony flash and would like to use it on my Canon system.

A: Godox receivers must match the brand of flash they are under Godox transmitters must match the brand of camera they are on. They have a limited ability to communicate between brands for example a Canon camera and transmitter can sync with a Nikon receiver and flash.

Q: 8. Hello! I have a Nikon D810 and a SB-700 (so far I have been working with the pop up flash in commander mode). I need a second flash unit and was considering the YN685. Does the YN685 work off camera on TTL mode when triggered by the pop-up flash of the Nikon D-810? Would I need a radio transmitter to control both flashes? In this case, can both flashes be set to TTL mode? Your answers would be very much appreciated!!! Thanks!

A: No the YN 685 wont fire with you built in flash. if you want to have your sb 700 and the yn685 working both off camera you will need a pair of these: https://a href= http://www.bhphotovideo.com/c/product/1190877-REG/yongnuo_yn_622n_kit_yn_622n_i_ttl_wireless_transceiver.html target= _blank www.bhphotovideo.com/c/product/1190877-REG/yongnuo_yn_622n_kit_yn_622n_i_ttl_wireless_transceiver.html/aas the yn685 already has the built in wireless.

Q: 9. Is this flash essentially the Yongnuo 568-EX with the YN622N transceiver built in?

A: No, it isn't. When off-camera, without a separate 622 TTL trigger, the YN685 does not give you TTL functionality. It will allow you to shoot in manual or multi mode, but the auto zoom feature will not work and TTL metering won't work. You can trigger the flash with a 603 or 622 transceiver, but will need a 622 for full TTL functionality.

Q: 10. Can I put my FA-WRC1M on it so I can trigger my HVL-F45M?

A: You can not stack TTL transmitters.