The light beige Countryman E6 Directional Earset Mic, Low Gain with Detachable 1mm Cable and 4-Pin Female Proprietary Connector for Fender Wireless Transmitters is a vocal microphone with an adjustable boom that weighs less than one tenth of an ounce and is designed to be used by only one person. Once adjusted, it will continually hold this shape.

The E6 earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6 earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6 earset's cable terminates to a 4-pin female proprietary connector for direct connection to Fender Passport wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Fender Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Stiff, Steel Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The classic E6 is a good choice when one person will wear the microphone. Because the boom is stiffer, it can be adjusted to fit, then stored away and quickly reworn.

The E6's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6 earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6 earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Ok, I'm sorry asked my question in a funny way. Let's try again: Is it safe to plug this ms300-v on a 15amps house outlet? Or does it need to be plugged on a 20amps one?

A: You can plug the light into a 110v 15amp which is the average household plug in the US.

Q: 2. how many lense and how many camara body it fit in there ?

A: The Manfrotto Pro Light Multiloader 26L Camera Backpack is large enough to carry two camera bodies, six lenses, and accessories.

Q: 3. I have x2t s ttl wireless flash trigger can this kit work with it ??

A: The Godox X2t will fire the flash but does not do TTL or HSS.

Q: 4. Are the fans noisy or would they be silent enough for interviews in a small studio?

A: It is our understanding that the fan built into this LED panel is quiet enough for shooting video.

Q: 5. As long as I understand, there are two Profoto speedring mount. This light what speedring uses?

A: Profoto only has one type of mount for their studio strobe lights; the side that mounts to the light fixture is identical. However, they have different speedrings depending on the light modifier you are using and on the light fixture you own. The difference is the rod connection used for the speedrings, and the type of softbox you will use on the light fixture. The Profoto B1X 500 AirTTL OCF Monolight is considered both a studio monolight and a part of Profoto's OCF (Off-Camera Flash) system. As such, you may use their Profoto RFi Speed Ring for Profoto Flash Heads, B&H # PRSRP, when using Profoto light modifiers with "RFi" in the name, or you may use the Profoto Speed Ring for OCF Flash Heads, B&H # PROCFSR, with Profoto's OCF flash modifiers with "OCF" in the name. If you are using a third-party universal softbox, I would recommend the Impact Speed Ring for Profoto, B&H # IMSRPRO, for your usage needs.

Q: 6. What is the warranty for this model?

A: The Godox MS300-V Studio Flash Monolight has a Limited 1-Year B&H Warranty.

Q: 7. Do the softboxes come with 2 layers of diffusion or is just one outside layer?

A: Yes, both softboxes in the Godox MS300-V Studio Flash Monolight (3-Light Kit) have an inner baffle and an outer diffusion panel as well.

Q: 8. Is this strobe compatible with the Fuji X-T5 camera using a Godox XPro (F) TTL wireless flash trigger?

A: Yes, the following trigger is needed in order to do so, end-users be mindful that this a all manual d riven unit only. Godox XProF TTL Wireless Flash Trigger for Fujifilm Cameras BH #GOXPROF • MFR #XPROF https://www.bhphotovideo.com/c/product/1381216-REG/godox_xprof_ttl_wireless_flash.html

Q: 9. Does this pack also come with a Air Remote trigger? I read elsewhere that it does but don't see it listed

A: No it does not include an Air Remote

Q: 10. Can the Godox MS300-V be triggered with non-godox wireless flash trigger? For example, can it be triggered with Yongnuo YN560-TX?

A: The Yongnuo YN560-TX Manual Flash Controller for Canon cannot directly control the Godox MS300-V Studio Flash Monolight as the Yongnuo transmitter is not compatible with Godox's 2.4 GHz X-wireless system. That being said, if you purchase the Yongnuo RF-603C II Wireless Flash Trigger Kit for Canon 3-Pin Connection, B&H # YORF603IIC3, or the Yongnuo YN-622C II E-TTL Wireless Flash Transceiver for Canon (2-Pack), B&H # YOYN622CII , and connect them to the sync terminal on the Godox MS300-V using the Impact Sync Cord Male Mini (3.5mm) to Male PC (1'), BH #IMMMPCM1. This will allow the Yongnuo YN560-TX Manual Flash Controller for Canon to wirelessly trigger the Godox MS300-V monolight..