The black Countryman E6i Directional Earset Mic, Medium Gain with Detachable 1mm Cable and 4-pin female proprietary Connector for Fender Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6i earset's cable terminates to a 4-pin female proprietary connector for direct connection to Fender Passport wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Fender Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this allow a Nikon flash to work in full manual - not iTTL? And will it also support HSS if the Nikon flash and camera offer HSS?

A: If you use the Godox Nikon Trigger, this Godox receiver will provide, Manual, i-TTL, TTL, & Ratio Flash Mode; High-Speed Sync.

Q: 2. I have a Nikon D3300 and a Altura speedlite for nikon, will this Gordox Trigger & Receiver set work in TTL mode, or must I set my flash power level independently?

A: While this Godox trigger system can trigger Nikon compatible flashes in TTL mode, it has not been tested with the Altura Speedlights for Nikon, therefore we cannot account for their compatibility. Your results may vary.

Q: 3. Fuji x t-4 compatibility?

A: This is compatible with the XT-4.

Q: 4. Does Nikon SU-800 work high speed sync photography ?

A: Yes it does. (i actually bought it for that) Check check also the flash model you are using just to make sure that it does high speed and is compatible with the su-800

Q: 5. what is the minimum sheet size for this printer?thank you

A: It can use anything from 4x6 to 13x19 inches.

Q: 6. Will this system work on SB 800 set on manual exposure? Or does it have to be set on TTL?

A: The SB-800 can be used in both TTL and manual when using this Godox trigger.

Q: 7. hola es compatible con una 5d mkII? muchas gracias

A: Si, es compatible con una 5D mk II.

Q: 8. Hello! I have a Nikon D810 and a SB-700 (so far I have been working with the pop up flash in commander mode). I need a second flash unit and was considering the YN685. Does the YN685 work off camera on TTL mode when triggered by the pop-up flash of the Nikon D-810? Would I need a radio transmitter to control both flashes? In this case, can both flashes be set to TTL mode? Your answers would be very much appreciated!!! Thanks!

A: No the YN 685 wont fire with you built in flash. if you want to have your sb 700 and the yn685 working both off camera you will need a pair of these: https://a href= http://www.bhphotovideo.com/c/product/1190877-REG/yongnuo_yn_622n_kit_yn_622n_i_ttl_wireless_transceiver.html target= _blank www.bhphotovideo.com/c/product/1190877-REG/yongnuo_yn_622n_kit_yn_622n_i_ttl_wireless_transceiver.html/aas the yn685 already has the built in wireless.

Q: 9. Does this transmitter allow for High Speed Sync?

A: Yes it can do HSS up to 1/8000th or the limits of the camera.

Q: 10. With my Sony A7RIV and Godox X1R-S be able to sync with my Sony HVL-F60RM2 and my Godox AD400Pro & AD300Pro?

A: You will need a XPro or X2 transmitter for on the camera, a receiver for the Sony brand flash. The Godox flashes have the receiver built in.