The tan Countryman E6i Omnidirectional Earset Mic, Low Gain with Detachable 1mm Cable and cH-style 4-pin Connector for Audio Technica Wireless Transmitters is a vocal microphone with a soft, flexible boom that facilitates its adjustment for different users. It's built with a larger silicone rubber earpiece making it better suited for situations when multiple users share the same mic.

The E6i earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6i earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6i earset's cable terminates to a cH-style 4-pin connector for direct connection to Audio Technica ATW-3201 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Audio Technica Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Soft, Flexible Boom    Larger, Silicone Rubber Earpiece    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6i is soft and highly flexible with a larger silicone rubber ear piece. When multiple users share a mic, the E6i is a great choice. The soft boom is durable and the flexibility makes it easy to adjust for different users.

The E6i's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6i earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6i earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Can I use those with:1) Canon T6i and2) AmazonBasics Electronic Flash for DSLR Cameras??Thank you

A: I have not used either of those components with the flash trigger system. If the pieces are TTL compatible they may work but I can not confirm they acceptable substitutes.

Q: 2. Is this compatible with the Sony a6300 & a6500?

A: Yes, the Godox X1T-S TTL Wireless Flash Trigger Transmitter for Sony, B&H # GOX1TS, is compatible for use with the Sony Multi-Interface hot shoe used on the Sony Alpha a6300 and a6500 Mirrorless Digital Camera.

Q: 3. Will YN-622N-TX sitting on the camera control zoom on YN-685 remotely?

A: Yes it works perfect.

Q: 4. If I don' t have a computer. Does this printer need to be connected to a computer to print pictures, or can I print from a USB flash drive?

A: You would need a computer to set up the printer, and connect it to your wireless network. Once that is done you can print wirelessly from an Android, iOS, or Wireless PictBridge device. You cannot print directly from a USB storage device.

Q: 5. can I plug this in a 220v socket?

A: I did. No problems.

Q: 6. I just received a Godox TT685c and an XProC. The XProC is working with the Godox speedlite, but I was under the impression that the XProC would also fire my Canon 600EXRT. However now I'm thinking I need the X1R-C attached to the Canon Speedlite to make it work. Is this correct?

A: I dont use the Canon product, so I am unable to advise. Hal Baxley.

Q: 7. Will this allow me to use my Speedlite 470ex-ai wirelessly one my softbox off camera?

A: Yes this will allow you to use a Canon 470EX-AI off camera.

Q: 8. I have a Nikon D700 & and SB700 speed light flash. Will this work with this camera flash combination?

A: Yes, you would put the 700s on the remote function (the one on the on switch wheel) and the SU800 would act as the master.

Q: 9. Can I attach this to my interfit S1 stobe and Fire it with my XProN? I use two TT685 mainly but once in awhile I need the Interfit strobe. Thanks in advance

A: You can use them however you will only be able to shoot manual under sync speed.

Q: 10. If the camera and flash support HSS, will this receiver catch the HSS signal?

A: This will only pick up the signals from another Godox transmitter. If that transmitter can do HSS then it can.