The Countryman E6 Flex Cardioid Microphone combines the springy, form-fitting ear grips of the E6, with the flexible and durable boom of the E6i earset microphone. The E6 Flex provides virtually invisible operation in stage performances, trade shows, houses-of-worship, auctions, lectures and much more.

The cardioid pattern effectively minimizes off-axis feedback and noise from nearby monitor speakers, instruments and noisy sources. Flexible microphone positioning is maintained and the included windscreen minimizes the wind noise often associated with cardioid microphones.

A wide variety of colors and connections are available for use with various wireless transmitters. This version is cocoa and the cable terminates to a standard XLR male connector for use in preamps, mixers, etc.

Cable with Standard XLR Connector    Slim Springy Ear Grips of E6    Flexible Boom of E6i    1mm Diameter Cable    Headroom for General Speaking    Cocoa

A miniature cardioid capsule is mounted to a low-profile, flexible frame. This lightweight, unobtrusive design is available in various colors that virtually render the entire microphone invisible against the skin.

The included removable, quick-swap cable detaches from the actual headset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy, as they are available in a wide selection of connections to accommodate various wireless transmitters.

The cardioid polar pattern is effective in minimizing off-axis residual noise from nearby monitor speakers, instruments and loud sources. The flexible boom provides a stiff fit that maintains its shape for single user applications. The E6 Flex is also available in a cardioid version for maximum off-axis noise rejection in environments with high feedback and noise.

This E6 Flex's sensitivity response is optimized to accurately capture general speech without noise and distortion.

The fit of the classic E6 meets the flexibility of the E6i. The front boom is like an E6i, the ear section is like the classic E6, the result is the best fitting easiest to use earset available.

Countryman Earsets are the smallest, lightest, and least visible head-worn microphones. The E6 Flex comes in four skin tones to disappear against the face.

Changeable protective caps let you switch between cardioid and hypercardioid patterns in seconds.

Frequency response is better than 30Hz to 15kHz with smooth off-axis response and >100dB dynamic range. Countryman Earsets sound like world-class, full size performance mics but the performer has complete freedom.

The E6i is exceptionally resistant to makeup, sweat and moisture when used with the supplied protective caps. The skin-colored, almost unbreakable boom resists water, sweat, and makeup and can be bent and re-bent many times to fit different performers. The front boom of the E6 Flex is slightly firmer than the E6i, so it's easily shaped right on the performer's face and smoothes out for a professional look.

The E6 Flex comes in three sensitivities for different speaking or singing styles, with up to 140dB SPL capability.

With other microphones a worn cable requires purchasing a completely new mic. An E6 replacement cable easily replaces it in less than a minute. Quick-connect miniature 1mm or 2mm super-rugged cables are available in four colors for almost any wireless transmitter or phantom mic input providing 3 - 48V.

Related Questions and Answers

Q: 1. Will this work with a Nikon Z9?

A: As of this moment Portkeys does not offer Nikon camera control with the BM5WR 5.5" display models.

Q: 2. I understand that camera controls can be done wirelessly for the Komodo, but is the image signal also wireless or is a SDI still needed?

A: Only controls are supported by the wireless unit. All video feed is via sdi inputs.

Q: 3. does the Portkeys bm5 lll have sharp detail?

A: Yes it does

Q: 4. Does touch auto focus work with Sony A7S3?

A: Touch focus is not capable with any other than the screen of the camera itself. The PORTKEYS BM5WR 5.5" HDMI Touchscreen Monitor with Camera Control offers settings control but not the focus.

Q: 5. Will it output the image with a LUT applied to the output?

A: The PORTKEYS BM5WR 5.5" HDMI Touchscreen Monitor with Camera Control's SDI OUT can output an image superimposed with 3DLUT.

Q: 6. I have both Red Komodo and Blackmagic. These are both controlled wirelessly, so can I switch this monitor from one to another or does it require a software install?

A: You would need to disconnect wireless access from one camera and then establish a new connection with the next camera. Only one camera will connect at a time.

Q: 7. Can it enter/exit playback on Blackmagic Pocket Cinema Camera 6K, to review clips on camera, when camera on crane beyond reach?

A: Unfortunately, no. Blackmagic Pocket Cinema Cameras' playback is accessed through a physical button.

Q: 8. Will this work with the xh2s? What about in 6.2k open gate?

A: Yes, the FUJIFILM X-H2S Mirrorless Camera can output a video signal from the HDMI output into the PORTKEYS BM5WR 5.5" HDMI Touchscreen Monitor with Camera Control. The HDMI output resolution can be adjusted on the FUJIFILM X-H2S Mirrorless Camera for various destinations.

Q: 9. Why is there no link to the OVERVIEW?

A: Manufacturer had not provided us with full overview for this product. Please visit the manufacturer's website at: https://bit.ly/3ykiBfl for more details.

Q: 10. can i plug the teradek ace transmitter via hdmi cable? and send the image to a focus puller? transmitter & receiver

A: The PORTKEYS BM5WR 5.5" HDMI Touchscreen Monitor with Camera Control can only be used with the Teradek Ace 500 HDMI Wireless Video Receiver provided with the Teradek Ace 500 HDMI Wireless Video Transmitter and Receiver Set since the receiver provides an HDMI output to feed into the HDMI input on the display. The Teradek Ace 500 HDMI Wireless Video Transmitter and the PORTKEYS BM5WR 5.5" HDMI Touchscreen Monitor with Camera Control only offer input for HDMI.