The PL-mount Tokina 135mm T1.5 Cinema Vista Prime Lens with focus scales marked in feet provides an image circle that more than covers full-frame sensors and is designed to provide sharp images even when recording images at 8K resolution. This 135mm focal length lens shares the same form factor, lens gear position, and front barrel diameter as the other Tokina Cinema Vista prime lenses, enabling quick on-set lens changes. It features a maximum T-stop of 1.5, useful when shooting in low-light situations or when you want to capture that exceedingly shallow depth of field look. The use of aspherical elements and lens coatings helps to greatly limit chromatic aberrations.

The 9-bladed iris provides round, out-of-focus highlights for a natural-looking bokeh. The lens is designed to minimize focus breathing and features geared manual focus and iris rings. Markings on both sides of the lens barrel make it readable from either side of the camera. The lens features a shimmable PL mount, and the front of the lens is 114mm in diameter with a built-in 1/4"-20 support foot that helps support the lens with the aid of an optional 1/4"-20 rod-mounted lens support (not included).

Covers Full Frame    46.7mm Image Circle    PL Mount    Suitable for 8K Image Capture    114mm Front Lens Diameter    Fast T1.5 to T22 Aperture    Virtually No Lens Breathing    Clickless 9-Bladed Iris    Weighs 6.6 lb    Integrated Lens Support Foot

The 135mm T1.5 PL-mount prime lens is capable of focusing images on a sensor with full 8K resolution and features a 46.7mm image circle, which easily covers standard-sized full-frame sensors.

Related Questions and Answers

Q: 1. Can this adapter be used to attach a T/T2 adapter to a 2" focuser of a Sky-Watcher 200PDS and a Fujifilm X-T2?

A: This would allow you to use a T mount with a X-T2.

Q: 2. Will this work on a BMCC?

A: In theory if you have a BMCC with micro four thirds mount this mount should work...the issue is that the sensor size between the two cameras Is different, The Cinema camera is bigger. I think you need to do a practical test on the matter.

Q: 3. will this lens work with a Panasonic Lumix DC-S1H ?

A: This is an EF mount lens while the S1H has an L-Mount. You will need a Canon EF Lens to Leica L-Mount adapter. https://bhpho.to/2ICgtHp

Q: 4. Will this work with a SpeedBooster on a Sony FS7?

A: Yes it will. This lens covers a Full Frame Sensor and the FS7 has a Super 35mm Sensor, which are two key requirements for a Speed Booster. Since this is a Cinema lens we suggest the Metabones Canon EF Lens to Sony E Mount T CINE Speed Booster ULTRA 0.71x (Fifth Generation), B&H # MEMBSPEFEBT3, because of its study connection. https://bhpho.to/2tTMK4p

Q: 5. Sorry, where's T11 at in this photo? Is the manufacturer just omitting a measurement on this one?

A: This lens does not have a marking for T11 on the body.

Q: 6. Will this cover the Blackmagic 4.6K sensor, or the RED 5K sensor?

A: The Canon CN-E 30-300mm T2.95-3.7 L S EF is a Super35mm lens and all lenses designed for Super 35mm will cover RED DRAGON at 5K. Since the Blackmagic URSA Mini 4.6K is a Super35mm sensor, the lens will cover that as well.

Q: 7. Would the 30-300mm EF mount version work with the canon 1.4x or doubler?

A: I'm afraid not. This lens will not work with a Telephoto Converter and you may even damage the lens if you attempt to use it with one.

Q: 8. Does this mount have back focus adjustability? It is not sharp at infinity.

A: All of our mounts are engineered and tested to exact specification for PL Mount sensor distance. However, if you wish to be able to adjust the mount in the future you should instead choose the MFT to PL Mount Pro (Pocket, BMMCC, BMMSC). Wooden Camera part number 179600. This kit comes with a shim set and the mount can be adjusted should the cameras backfocus change over time.

Q: 9. Do the XEEN lenses have lens support on the bottom of the lenses?

A: None of the current XEEN lenses is known to have lens support. The current lenses weigh between 2.5 and 2.7 lbs or so and do not need the support. If they go to 100mm plus, I would be looking for support being added then.

Q: 10. Is this adapter compatible with the BMPCC 6K Pro?

A: No, the Wooden Camera PL Lens Mount Adapter for Blackmagic Design Pocket Cinema Camera is not compatible with the Blackmagic Design Pocket Cinema Camera 6K Pro.