The cocoa Countryman E6X Directional Earset Mic, Standard Gain with Detachable 1mm Cable and 3.5mm Connector for Amplivox Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6X earset's cable terminates to a 3.5mm connector for direct connection to Amplivox S-1600T and S-1690T wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Amplivox Transmitters    Headroom for General Speaking    Detachable 1mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. When using this trigger to manually control flash output, does it still do a pre-flash (the Odin's do this) prior to firing?

A: I never do pre-flashes, when I start shooting I turn on my flash I test the light than start shooting

Q: 2. Is this compatible with the the new canon 1D Xmii

A: hi Ken but I heard that yn 685 has inbuilt receivers. so why need 2 yn622c.

Q: 3. Will this work with my Phottix Mitros speedlight?

A: You can use it with a Mitros speed light, however it only works with a Godox transmitter.

Q: 4. Can I use those with:1) Canon T6i and2) AmazonBasics Electronic Flash for DSLR Cameras??Thank you

A: I have not used either of those components with the flash trigger system. If the pieces are TTL compatible they may work but I can not confirm they acceptable substitutes.

Q: 5. Does it work with Nikon SB700 & nIKON SB5000?

A: Unfortunately, this Air10S Commander will not fire the SB-700 or SB5000 as Nissin no longer produces a Nikon compatible receiver.

Q: 6. Will the YongNuo Wireless Controller control an SB-900 in slave mode?

A: If you also get the radio tranciever (yn622n, I believe), you can attach your sb900 to it. Then, you'll be able to trigger both the 685 and the sb900 independently.I am using a similar setup (although I use the sb910). Works great. One of the best aspects of this is that the yongnuo radio controller presents all the flash values to you without needing to monkey around in the camera menu. In addition you can also control the flash's zoom setting.

Q: 7. Will the X1r work with other brands? Like the Phottix indra. And does HSS works? Thank you

A: No, this will not work with Phottix brand receivers. Use this with a Godox transmitter such as the X1T, X2, or XPRO.

Q: 8. Will this work with fuji x100v?

A: Yes, it will work with the X100V.

Q: 9. I read that this can trigger camera shutters - I have no interest in using this receiver with flashes. Will this hold up to PocketWizards in triggering remote cameras at sports games? How's the delay and can it trigger bursts?

A: It will work as a remote shutter. Chances are the Pocketwizard is faster than that one. But it should come close. You will need a transmitter to go with that. If you do not have one you have these options, https://bhpho.to/3iuFGoJ

Q: 10. Can i use this trigger on the Sunpak df4000U? I have a Sony A7ii. Thanks

A: The Godox X1R-S TTL Wireless Flash Receiver for Sony BH #GOX1RS can be used as a manual receiver for the Sunpak DF4000U. You will need a transmitter on the camera.