The black Countryman E6X Omnidirectional Earset Mic, Standard Gain with Detachable 2mm Cable and cH-style 4-pin Connector for Audio Technica Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, omnidirectional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the highest gain for general speaking such as presentations or sermons. In addition, the earset comes with three protective caps with different high-frequency response characteristics that control the amount of crispness or sibilance (response at 15 kHz). This omnidirectional E6X earset's cable terminates to a cH-style 4-pin connector for direct connection to Audio Technica ATW-3201 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Audio Technica Transmitters    Headroom for General Speaking    Detachable 2mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    3 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. This omnidirectional version includes three protective caps—+4 dB (bright), +8 dB (very bright) and +0 dB (flat)—that controls the amount of crispness or sibilance (response at 15 kHz.)

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The omnidirectional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will the YongNuo Wireless Controller control an SB-900 in slave mode?

A: If you also get the radio tranciever (yn622n, I believe), you can attach your sb900 to it. Then, you'll be able to trigger both the 685 and the sb900 independently.I am using a similar setup (although I use the sb910). Works great. One of the best aspects of this is that the yongnuo radio controller presents all the flash values to you without needing to monkey around in the camera menu. In addition you can also control the flash's zoom setting.

Q: 2. The Canon 600ex rt can be used on the X1T-C to control the Godox v8602 placed off camera?

A: A Canon 600EXRT can be placed on top of the X1T-c, but the X1 not the 600EXRT will be in control of the V860II.

Q: 3. In the article, it says it's compatible with ETTL I. However, on the downloadable manual, it says it's only compatible with ETTL II. Will this work with the 430 EX ETTL I ?

A: According to Canon, the Speedlite 430EX features E-TTL II, E-TTL, and TTL. It'll be a good match for your original 430 EX.

Q: 4. Can the x1n Transmitter be used on a d750 with a Nikon sb700 and a Godox Ad200 keeping TTL?

A: The X1T-N will work on a D750 with an AD200 full TTL, HSS and manual adjustments. In order to have it work with an SB you will need a receiver for the flash https://bhpho.to/2Xj9N7M.

Q: 5. What is the max sync speed? I need 1/250sec

A: Because your camera uses TTL, this will duplicate just as if your speed light is on camera. I have noticed that when this set up is used, it automatically switched my camera to Manuel flash. You're going to control your speedlight output using the controls on the transmitter. Really nice set up without spending Pocket Wizard money.

Q: 6. Can I use a remote shutter release while using the SU-800 Wireless Speedlight Commander Unit ? I want remote shutter and wireless flash at the same time.

A: Yes a remote shutter release can be used while this SU-800 is on the camera.

Q: 7. When using this trigger to manually control flash output, does it still do a pre-flash (the Odin's do this) prior to firing?

A: I never do pre-flashes, when I start shooting I turn on my flash I test the light than start shooting

Q: 8. I read that this can trigger camera shutters - I have no interest in using this receiver with flashes. Will this hold up to PocketWizards in triggering remote cameras at sports games? How's the delay and can it trigger bursts?

A: It will work as a remote shutter. Chances are the Pocketwizard is faster than that one. But it should come close. You will need a transmitter to go with that. If you do not have one you have these options, https://bhpho.to/3iuFGoJ

Q: 9. Will this trigger work with a godox flash for Sony used as a remote?

A: If you are using a Godox-branded flash designed for Sony cameras, if the Godox flash has the most recent firmware update, and you are using a Micro Four Thirds camera (either an Olympus or Panasonic M43 camera), then yes, the Godox X1T-O TTL Wireless Flash Trigger Transmitter for Olympus/Panasonic, B&H # GOX1TCOP, listed above mounted on your M43 camera would be able to wirelessly trigger your Godox-branded Sony flash as the most recent firmware update from Godox allows for cross-platform compatibility with their X-system flashes.

Q: 10. Is this compatible with the Sony a6300 & a6500?

A: Yes, the Godox X1T-S TTL Wireless Flash Trigger Transmitter for Sony, B&H # GOX1TS, is compatible for use with the Sony Multi-Interface hot shoe used on the Sony Alpha a6300 and a6500 Mirrorless Digital Camera.