The light beige Countryman E6X Directional Earset Mic, Low Gain with Detachable 1mm Cable and TA4F Connector for HME Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers the lowest gain for the most powerful vocals that require the highest overload. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6X earset's cable terminates to a TA4F connector for direct connection to HME TX550 and TX822 wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits HME Transmitters    Headroom for Strong Vocals    Detachable 1mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Is there an adapter that would allow this to be attached to a standard tripod? I can't quite tell how it's possible to attach something for mounting....

A: This has a 1/4 20 receiver that can be used with a tripod.

Q: 2. Will this work with Nikon z7 II camera?

A: Yes, the Godox MS200-V Studio Flash Monolight (3-Light Kit) will work with the Nikon Z7 ii camera. The strobes are manual. So, they do not support TTL.

Q: 3. Is this strobe compatible with the Fuji X-T5 camera using a Godox XPro (F) TTL wireless flash trigger?

A: Yes, the following trigger is needed in order to do so, end-users be mindful that this a all manual d riven unit only. Godox XProF TTL Wireless Flash Trigger for Fujifilm Cameras BH #GOXPROF • MFR #XPROF https://www.bhphotovideo.com/c/product/1381216-REG/godox_xprof_ttl_wireless_flash.html

Q: 4. Can the Godox MS300-V be triggered with non-godox wireless flash trigger? For example, can it be triggered with Yongnuo YN560-TX?

A: The Yongnuo YN560-TX Manual Flash Controller for Canon cannot directly control the Godox MS300-V Studio Flash Monolight as the Yongnuo transmitter is not compatible with Godox's 2.4 GHz X-wireless system. That being said, if you purchase the Yongnuo RF-603C II Wireless Flash Trigger Kit for Canon 3-Pin Connection, B&H # YORF603IIC3, or the Yongnuo YN-622C II E-TTL Wireless Flash Transceiver for Canon (2-Pack), B&H # YOYN622CII , and connect them to the sync terminal on the Godox MS300-V using the Impact Sync Cord Male Mini (3.5mm) to Male PC (1'), BH #IMMMPCM1. This will allow the Yongnuo YN560-TX Manual Flash Controller for Canon to wirelessly trigger the Godox MS300-V monolight..

Q: 5. Are the strobes heavy?

A: The Godox SK400II-V Studio Flash Monolight are 4.4 lb / 2 kg each.

Q: 6. can you use pocket wizards with this?

A: yes. you will loose air functionality including TTL and HSS, but you can plug in a PW

Q: 7. Hello. Can I control this unit with my Canon Speedlite Transmitter ST-E3-RT( I have to 600ex speedlites)?

A: Unfortunately the two systems are not compatible. It has an optical slave for basic sync. For real control you need a Air TTL https://bhpho.to/2IoEJfC.

Q: 8. Is it compatible with Sony A7III?

A: The Godox SK400II-V Studio Flash Monolight (2-Light Kit) is a manual strobe and is compatible with the A7III camera.

Q: 9. what's the wattage of modelling lamp ?

A: Maximum Power 300 Ws and features a 12 watt modeling light.

Q: 10. Will these work with the Canon 600Ex-Rt speedlites? also, are these wireless?

A: The Godox MS300-V Studio Flash Monolight works with optional X1, X2, XT-16, or FT-16 triggers to control the power ratio, modeling lamp, buzzer, and flash triggering. The best way to make the Canon EX-RT Speedlites wireless would be to use the Godox X2 2.4 GHz TTL Wireless Flash Trigger for Canon. This will sync your speedlites and allow them to be fired alongside or in sync with the Godox MS300-V Studio Flash Monolight.